5 open source boards using the AD8605
Real designs built with the AD8605, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry bioamplifier
martijnschouten
28.6 × 48.9 mm91 parts2LGPL-3.04STM32
Bloodlight hardware
CodethinkLabs
28 × 78 mm96 parts4LCERN-OHL-P-2.02STM32H750VB-Mobo
CalciumCarbideElectronic
134.6 × 127 mm278 parts2LNo license0RP2040/RP2350
Capacitor leakage tester
Fyfar
100 × 67.5 mm61 parts2LMIT0STM32
Psu
adamgreig
100 × 100 mm137 parts2LNo license0
How designs wire the AD8605
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AD8605 connects to, and the resistors, capacitors and other passives placed on it.
- The V+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The V- pin is tied to GND on 5 of 5 designs.
- Pin 1 has a series resistor on 3 of 5 designs, most often 560 kΩ (then 56 kΩ).
- The + pin has a resistor to GND on 3 of 5 designs, most often 100 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: The microcontroller 40% |
|
| V-pin 2 | Connected to: GND 100% | — |
| +pin 3 | Connected to: Signal 80% · GND 20% |
|
| -pin 4 | Connected to: Signal 100% |
|
| V+pin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Raspberry bioamplifier by martijnschouten, Bloodlight hardware by CodethinkLabs, Psu by adamgreig and STM32H750VB-Mobo by CalciumCarbideElectronic.
The AD8605 in open source designs
The gallery holds 5 open source boards using the AD8605 from 5 GitHub repositories; a typical one measures about 100 × 78 mm and carries around 96 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Raspberry bioamplifier by martijnschouten.
Microcontrollers on boards using the AD8605
What boards using the AD8605 are built for
AD8605: common questions
Where can I find a AD8605 reference design?
Each of the 5 boards on this page is a real design using the AD8605. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AD8605 V+ pin?
The V+ pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the AD8605.
How is the AD8605 V- pin connected?
The V- pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AD8605.
What resistor goes on the AD8605 pin 1?
Pin 1 has a series resistor on 3 of 5 designs, most often 560 kΩ (then 56 kΩ). Counted from the KiCad layouts of 5 open source designs using the AD8605.
Which microcontrollers do boards using the AD8605 use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the AD8605?
The median is 100 × 78 mm, and 80% are two-layer designs.
What is the most popular open source board using the AD8605?
By GitHub stars, Raspberry bioamplifier by martijnschouten, with 4 stars.
Can I simulate one of these boards using the AD8605 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.