4 open source boards using the ADCS7476
Real designs built with the ADCS7476, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Main board
elkel53930
84 × 114 mm104 parts2LMIT2ESP32
Twilight2
elkel53930
80 × 80 mm161 parts4LNo license0RP2040/RP2350
Extraice
elkel53930
38 × 61 mm90 parts2LNo license0Analog part
AUV-IITK
72.1 × 75.7 mm82 parts2LNo license3
The ADCS7476 in open source designs
The gallery holds 4 open source boards using the ADCS7476 from 4 GitHub repositories; a typical one measures about 76 × 77.8 mm and carries around 97 components.
75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Analog part by AUV-IITK.
Parts used alongside the ADCS7476
Microcontrollers on boards using the ADCS7476
ADCS7476: common questions
Where can I find a ADCS7476 reference design?
Each of the 4 boards on this page is a real design using the ADCS7476. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ADCS7476?
The LSM6DSR, BD63573NUV, FT231XQ-R, LM74700QDBVRQ1 and MCP73213T-A6SI/MF appear in the most repositories here.
Which microcontrollers do boards using the ADCS7476 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the ADCS7476?
The median is 76 × 77.8 mm, and 75% are two-layer designs.
What is the most popular open source board using the ADCS7476?
By GitHub stars, Analog part by AUV-IITK, with 3 stars.
Can I simulate one of these boards using the ADCS7476 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.