33 open source boards using the LM74700QDBVRQ1

Real designs built with the LM74700QDBVRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

33 boardsClear filters|Most starred

How designs wire the LM74700QDBVRQ1

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the LM74700QDBVRQ1 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCAP pin has a capacitor to the supply on 14 of 20 designs, most often 100 nF (then 1 µF).
  • The CATHODE pin is tied to BATT on 15 of 20 designs (a signal on 5).
  • The ANODE pin is tied to VIN_RAW on 15 of 20 designs (a signal on 5).
  • The EN pin is tied to VIN_RAW on 13 of 20 designs (a signal on 6).
VCAPpin 1Connected to: Signal 100%
  • Capacitor to the supply on 70% · 100 nF (10), 1 µF (2)
GNDpin 2Connected to: GND 95%
ENpin 3Connected to: VIN_RAW 65% · a signal 30%
CATHODEpin 4Connected to: BATT 75% · a signal 25%
ANODEpin 6Connected to: VIN_RAW 75% · a signal 25%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moducard cm5-module by Dominik-Workshop, Before maze by ekremturanfirat, Main board by elkel53930 and Main board by elkel53930.

The LM74700QDBVRQ1 in open source designs

The gallery holds 33 open source boards using the LM74700QDBVRQ1 from 21 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 118 components.

88% use four copper layers or more, and 52% carry an open source license.

The most starred is Moducard cm5-module by Dominik-Workshop.

Microcontrollers on boards using the LM74700QDBVRQ1

LM74700QDBVRQ1: common questions

Where can I find a LM74700QDBVRQ1 reference design?

Each of the 33 boards on this page is a real design using the LM74700QDBVRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM74700QDBVRQ1 VCAP pin connected?

The VCAP pin has a capacitor to the supply on 14 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the LM74700QDBVRQ1.

How is the LM74700QDBVRQ1 CATHODE pin connected?

The CATHODE pin is tied to BATT on 15 of 20 designs (a signal on 5). Counted from the KiCad layouts of 20 open source designs using the LM74700QDBVRQ1.

How is the LM74700QDBVRQ1 ANODE pin connected?

The ANODE pin is tied to VIN_RAW on 15 of 20 designs (a signal on 5). Counted from the KiCad layouts of 20 open source designs using the LM74700QDBVRQ1.

What parts are used alongside the LM74700QDBVRQ1?

The USBLC6-2SC6, AMS1117-3.3, BD63573NUV, ESP32-WROOM-32E-N4 and FT231XQ-R appear in the most repositories here.

Which microcontrollers do boards using the LM74700QDBVRQ1 use?

Most are built on ESP32 (20), STM32 (7) and Raspberry Pi (1).

How big is a typical board using the LM74700QDBVRQ1?

The median is 100 × 90 mm, and 12% are two-layer designs.

What is the most popular open source board using the LM74700QDBVRQ1?

By GitHub stars, Moducard cm5-module by Dominik-Workshop, with 5 stars.

Can I simulate one of these boards using the LM74700QDBVRQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part