4 open source boards using the AMC1311BDWVR

Real designs built with the AMC1311BDWVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AMC1311BDWVR in open source designs

The gallery holds 4 open source boards using the AMC1311BDWVR from 4 GitHub repositories; a typical one measures about 100 × 145.9 mm and carries around 321 components.

75% use four copper layers or more, and 50% carry an open source license.

The most starred is UVerter by owntech-foundation.

Microcontrollers on boards using the AMC1311BDWVR

What boards using the AMC1311BDWVR are built for

AMC1311BDWVR: common questions

Where can I find a AMC1311BDWVR reference design?

Each of the 4 boards on this page is a real design using the AMC1311BDWVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AMC1311BDWVR?

The MCP6486UT-E/LT, OwnTech_SPIN, +-20A Hall, ACS730xLCTR-20AB and AMC1100DUB appear in the most repositories here.

Which microcontrollers do boards using the AMC1311BDWVR use?

Most are built on AVR/Arduino (1).

How big is a typical board using the AMC1311BDWVR?

The median is 100 × 145.9 mm, and 25% are two-layer designs.

What is the most popular open source board using the AMC1311BDWVR?

By GitHub stars, UVerter by owntech-foundation, with 112 stars.

Can I simulate one of these boards using the AMC1311BDWVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part