5 open source boards using the AP2553W6
Real designs built with the AP2553W6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ttyloopdriver
John-Nagle
119.4 × 74.9 mm66 parts2LGPL-3.052RP2040/RP2350
Pedalboard hw
pedalboard
174 × 111 mm142 parts2LCERN-OHL-P-2.014Specter
zenos01
65 × 67 mm72 parts4LNo license4Raspberry Pi
Travel router
0x62b
80 × 80 mm49 parts4LNo license1Raspberry Pi
CM5IO
zenos01
160 × 90 mm62 parts4LNo license4
The AP2553W6 in open source designs
The gallery holds 5 open source boards using the AP2553W6 from 4 GitHub repositories; a typical one measures about 119.4 × 80 mm and carries around 66 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is Ttyloopdriver by John-Nagle.
Parts used alongside the AP2553W6
Microcontrollers on boards using the AP2553W6
What boards using the AP2553W6 are built for
AP2553W6: common questions
Where can I find a AP2553W6 reference design?
Each of the 5 boards on this page is a real design using the AP2553W6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP2553W6 use?
Most are built on Raspberry Pi (2) and RP2040/RP2350 (1).
How big is a typical board using the AP2553W6?
The median is 119.4 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the AP2553W6?
By GitHub stars, Ttyloopdriver by John-Nagle, with 52 stars.
Can I simulate one of these boards using the AP2553W6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.