11 open source boards using the AP63200WU-7
Real designs built with the AP63200WU-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Avionics project
TUSI-KHU
127.5 × 62 mm74 parts2LApache-2.02STM32
Relock Artiq
KLFAMO
161 × 100 mm375 parts4LNo license0Current100A Artiq
KLFAMO
161 × 100 mm324 parts4LNo license0ESP32
Controller core reva
itorralbo
141.6 × 135.2 mm187 parts4LMIT0ESP32
Vivonics bench
physiii
173 × 61.1 mm175 parts4LNo license0Microchip SAM
FCI-SAMD51-Universal-Controller
libertathiest
100 × 65.9 mm96 parts2LNo license0ESP32
Canary
stoatworks-labs
100 × 81 mm76 parts4LCERN-OHL-S-2.00AVR/Arduino
Fs10-atmega32u4-monitor
libertathiest
58 × 68.5 mm66 parts2LNo license0- schematic only · 74 parts
Circuit builder
StevenRS11
74 partsNo license0 - schematic only · 48 parts
Ksch
bleugreen
48 partsNo license0 NXP
Avionics final 260706
TUSI-KHU
127.5 × 62 mm67 parts2LApache-2.02
How designs wire the AP63200WU-7
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the AP63200WU-7 connects to, and the resistors, capacitors and other passives placed on it.
- The SW_5 pin has a series capacitor on 8 of 8 designs, most often 100 nF.
- The SW_5 pin has a inductor on 8 of 8 designs, most often 10 µH (then 4.7 µH).
- The BST_6 pin has a series capacitor on 8 of 8 designs, most often 100 nF.
- The EN_2 pin is tied to 24V on 8 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FB_1pin 1 | Connected to: Signal 88% |
|
| EN_2pin 2 | Connected to: 24V 100% | — |
| IN_3pin 3 | Connected to: 24V 100% | — |
| GND_4pin 4 | Connected to: GND 88% | — |
| SW_5pin 5 | Connected to: Signal 100% |
|
| BST_6pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Avionics final 260706 by TUSI-KHU, Controller core reva by itorralbo, Current100A Artiq by KLFAMO and Relock Artiq by KLFAMO.
The AP63200WU-7 in open source designs
The gallery holds 11 open source boards using the AP63200WU-7 from 10 GitHub repositories; a typical one measures about 127.5 × 68.5 mm and carries around 76 components.
56% use four copper layers or more, and 36% carry an open source license.
The most starred is Avionics project by TUSI-KHU.
Parts used alongside the AP63200WU-7
Microcontrollers on boards using the AP63200WU-7
What boards using the AP63200WU-7 are built for
AP63200WU-7: common questions
Where can I find a AP63200WU-7 reference design?
Each of the 11 boards on this page is a real design using the AP63200WU-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP63200WU-7 SW_5 pin connected?
The SW_5 pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the AP63200WU-7.
How is the AP63200WU-7 BST_6 pin connected?
The BST_6 pin has a series capacitor on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the AP63200WU-7.
How is the AP63200WU-7 EN_2 pin connected?
The EN_2 pin is tied to 24V on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the AP63200WU-7.
What parts are used alongside the AP63200WU-7?
The AP63203WU-7, 24AA02E48T-I/OT, CH224K, LD29150DT50R and SN65MLVD040RGZT appear in the most repositories here.
Which microcontrollers do boards using the AP63200WU-7 use?
Most are built on ESP32 (3), NXP (2), AVR/Arduino (1) and Microchip SAM (1).
How big is a typical board using the AP63200WU-7?
The median is 127.5 × 68.5 mm, and 44% are two-layer designs.
What is the most popular open source board using the AP63200WU-7?
By GitHub stars, Avionics project by TUSI-KHU, with 2 stars.
Can I simulate one of these boards using the AP63200WU-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.