10 open source boards using the AP7331-WG-7
Real designs built with the AP7331-WG-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pmw3360-optical sensor
wj-zhe
36.1 × 40 mm16 parts2LNo license2Kicad2
ESCO2522
38.7 × 42.8 mm14 parts2LNo license0AVR/Arduino
Mykeyboard
Skycode22
409 × 137 mm178 parts2LNo license132AVR/Arduino
OOTstag rev2
Skycode22
409 × 137 mm170 parts2LNo license132Scroll wheel trackball
sadekbaroudi
64.8 × 63.5 mm19 parts2LCERN-OHL-P-2.0220AVR/Arduino
Keyboard
Skycode22
364.9 × 108.3 mm40 parts2LNo license132Pmw3360
sadekbaroudi
25.9 × 41.3 mm14 parts2LCERN-OHL-P-2.0220AVR/Arduino
Alpha29 pmw3360
Skycode22
301 × 77 mm14 parts2LNo license132AVR/Arduino
Gigan rev2
Skycode22
305.9 × 135.1 mm14 parts2LNo license132Pmw3360 fsr
wj-zhe
25.6 × 35 mm16 parts2LNo license25
How designs wire the AP7331-WG-7
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AP7331-WG-7 connects to, and the resistors, capacitors and other passives placed on it.
- The ADJ pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
- The ADJ pin has a pull-up to 2V on 5 of 5 designs, most often 15 kΩ.
- The IN pin is tied to 5V on 5 of 5 designs.
- The EN pin is tied to 5V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 100% | — |
| ADJpin 4 | Connected to: Signal 100% |
|
| OUTpin 5 | Connected to: 2V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pmw3360 by sadekbaroudi, Alpha29 pmw3360 by Skycode22, Pmw3360 fsr by wj-zhe and Pmw3360-optical sensor by wj-zhe.
The AP7331-WG-7 in open source designs
The gallery holds 10 open source boards using the AP7331-WG-7 from 5 GitHub repositories; a typical one measures about 182.9 × 70.2 mm and carries around 16 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Scroll wheel trackball by sadekbaroudi.
Parts used alongside the AP7331-WG-7
Microcontrollers on boards using the AP7331-WG-7
What boards using the AP7331-WG-7 are built for
AP7331-WG-7: common questions
Where can I find a AP7331-WG-7 reference design?
Each of the 10 boards on this page is a real design using the AP7331-WG-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AP7331-WG-7 ADJ pin?
The ADJ pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the AP7331-WG-7.
How is the AP7331-WG-7 IN pin connected?
The IN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AP7331-WG-7.
How is the AP7331-WG-7 EN pin connected?
The EN pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AP7331-WG-7.
What parts are used alongside the AP7331-WG-7?
The PMW3360DM-T2QU, XC6206P332MR and TXS0104EDR appear in the most repositories here.
Which microcontrollers do boards using the AP7331-WG-7 use?
Most are built on AVR/Arduino (5).
How big is a typical board using the AP7331-WG-7?
The median is 182.9 × 70.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP7331-WG-7?
By GitHub stars, Scroll wheel trackball by sadekbaroudi, with 220 stars.
Can I simulate one of these boards using the AP7331-WG-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.