13 open source boards using the TXS0104EDR

Real designs built with the TXS0104EDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TXS0104EDR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TXS0104EDR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 100 nF).
  • The NC_1_6 pin is left unconnected on 7 of 7 designs.
  • The NC_2_9 pin is left unconnected on 7 of 7 designs.
  • The OE pin has a capacitor to GND on 5 of 7 designs, most often 10 µF (then 100 nF).
VCCApin 1Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 86% · 10 µF (3), 100 nF (3)
NC_1_6pin 6Connected to: Not connected 100%
GNDpin 7Connected to: GND 100%
OEpin 8Connected to: The microcontroller 29%, PMW3360DM-T2QU 29%, XC6206P332MR 29% · 3.3V 43%
  • Capacitor to GND on 71% · 10 µF (3), 100 nF (2)
  • Series resistor on 43% · 10 kΩ (3)
NC_2_9pin 9Connected to: Not connected 100%
VCCBpin 14Connected to: 5V 100%
  • Decoupling capacitor on 57% · 100 nF (4), 2.2 µF (1)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Alpha29 pmw3360 by Skycode22, Frank by rh1tech, Pmw3360-optical sensor by wj-zhe and Mega frank u4 by evgs.

The TXS0104EDR in open source designs

The gallery holds 13 open source boards using the TXS0104EDR from 7 GitHub repositories; a typical one measures about 149.9 × 90 mm and carries around 113 components.

92% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is Mykeyboard by Skycode22.

Microcontrollers on boards using the TXS0104EDR

TXS0104EDR: common questions

Where can I find a TXS0104EDR reference design?

Each of the 13 boards on this page is a real design using the TXS0104EDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXS0104EDR VCCA pin?

The VCCA pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TXS0104EDR.

How is the TXS0104EDR NC_1_6 pin connected?

The NC_1_6 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TXS0104EDR.

How is the TXS0104EDR NC_2_9 pin connected?

The NC_2_9 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TXS0104EDR.

What parts are used alongside the TXS0104EDR?

The AP7331-WG-7, XC6206P332MR, 74HC4052D,653, 74HC595 and 74HC74 appear in the most repositories here.

Which microcontrollers do boards using the TXS0104EDR use?

Most are built on AVR/Arduino (5), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the TXS0104EDR?

The median is 149.9 × 90 mm, and 92% are two-layer designs.

What is the most popular open source board using the TXS0104EDR?

By GitHub stars, Mykeyboard by Skycode22, with 132 stars.

Can I simulate one of these boards using the TXS0104EDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part