3 open source boards using the AT24C32
Real designs built with the AT24C32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Floppy board 3.0
FloppyO1
20.5 × 41.2 mm33 parts2LCERN-OHL-S-2.05AVR/Arduino
PiFanIrHat
llegoff
65 × 56.5 mm28 parts2LCERN-OHL-1.25STM32
FLOPPY BOARD v2.x
FloppyO1
23.4 × 33.3 mm18 parts2LCERN-OHL-S-2.05
The AT24C32 in open source designs
The gallery holds 3 open source boards using the AT24C32 from 2 GitHub repositories; a typical one measures about 23.4 × 41.2 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Floppy board 3.0 by FloppyO1.
Microcontrollers on boards using the AT24C32
What boards using the AT24C32 are built for
AT24C32: common questions
Where can I find a AT24C32 reference design?
Each of the 3 boards on this page is a real design using the AT24C32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AT24C32 use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the AT24C32?
The median is 23.4 × 41.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the AT24C32?
By GitHub stars, Floppy board 3.0 by FloppyO1, with 5 stars.
Can I simulate one of these boards using the AT24C32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.