6 open source boards using the AT24CS01-SSHM
Real designs built with the AT24CS01-SSHM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
My jetson nano baseboard
NVIDIA-AI-IOT
80 × 100 mm232 parts4LCustom license91ESP32
Clock
Matir
196.7 × 31.5 mm90 parts2LBSD-2-Clause18ESP32
Portable-Weather-Station
shubhamp2007
64.5 × 56.5 mm26 parts2LNo license1AVR/Arduino
Micro mp
c04022004
100 × 40 mm47 parts2LNo license0AVR/Arduino
RadHardSchematics
FraserD404
203 × 79.7 mm34 parts2LNo license0Td rgbinput
tdaede
165 × 50 mm116 parts2LNo license370
How designs wire the AT24CS01-SSHM
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AT24CS01-SSHM connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 4 of 6 designs, most often 2.2 kΩ (then 4.7 kΩ).
- The SCL pin has a pull-up to 3.3V on 4 of 6 designs, most often 2.2 kΩ (then 4.7 kΩ).
- The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 50% · a signal 50% |
|
| A1pin 2 | Connected to: GND 50% · a signal 50% |
|
| A2pin 3 | Connected to: GND 50% · a signal 50% |
|
| GNDpin 4 | Connected to: GND 83% · a signal 17% | — |
| SDApin 5 | Connected to: A connector 50% |
|
| SCLpin 6 | Connected to: A connector 50% |
|
| VCCpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td rgbinput by tdaede, My jetson nano baseboard by NVIDIA-AI-IOT, Clock by Matir and Portable-Weather-Station by shubhamp2007.
The AT24CS01-SSHM in open source designs
The gallery holds 6 open source boards using the AT24CS01-SSHM from 6 GitHub repositories; a typical one measures about 132.5 × 53.3 mm and carries around 69 components.
83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Td rgbinput by tdaede.
Microcontrollers on boards using the AT24CS01-SSHM
What boards using the AT24CS01-SSHM are built for
AT24CS01-SSHM: common questions
Where can I find a AT24CS01-SSHM reference design?
Each of the 6 boards on this page is a real design using the AT24CS01-SSHM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the AT24CS01-SSHM SDA pin?
The SDA pin has a pull-up to 3.3V on 4 of 6 designs, most often 2.2 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the AT24CS01-SSHM.
What pull-up resistor is used on the AT24CS01-SSHM SCL pin?
The SCL pin has a pull-up to 3.3V on 4 of 6 designs, most often 2.2 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the AT24CS01-SSHM.
What decoupling capacitors do designs use on the AT24CS01-SSHM VCC pin?
The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the AT24CS01-SSHM.
Which microcontrollers do boards using the AT24CS01-SSHM use?
Most are built on AVR/Arduino (2) and ESP32 (2).
How big is a typical board using the AT24CS01-SSHM?
The median is 132.5 × 53.3 mm, and 83% are two-layer designs.
What is the most popular open source board using the AT24CS01-SSHM?
By GitHub stars, Td rgbinput by tdaede, with 370 stars.
Can I simulate one of these boards using the AT24CS01-SSHM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.