22 open source boards using the ATMEGA32U2-AU

Real designs built with the ATMEGA32U2-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the ATMEGA32U2-AU

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ATMEGA32U2-AU connects to, and the resistors, capacitors and other passives placed on it.

  • The XTAL1 pin has a crystal on 11 of 11 designs, most often 16 MHz.
  • The PC0/XTAL2 pin has a crystal on 11 of 11 designs, most often 16 MHz.
  • The UCAP pin has a capacitor to GND on 11 of 11 designs, most often 1 µF.
  • The XTAL1 pin has a capacitor to GND on 10 of 11 designs, most often 22 pF (then 14 pF).
XTAL1pin 1Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (4)
  • Capacitor to GND on 91% · 22 pF (6), 14 pF (1), 10 pF (1)
PC0/XTAL2pin 2Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (4)
  • Capacitor to GND on 91% · 22 pF (6), 14 pF (1), 10 pF (1)
GNDpin 3Connected to: GND 100%
VCCpin 4Connected to: 5V 100%
  • Decoupling capacitor on 64% · 100 nF (6), 10 µF (1)
PC2pin 5Connected to: Not connected 73% · a signal 27%
PD0pin 6Connected to: Not connected 64% · a signal 36%
PD1pin 7Connected to: Not connected 64% · a signal 36%
PD6pin 12Connected to: Not connected 64% · a signal 36%
HWB/PD7pin 13Connected to: Signal 91%
  • Resistor to GND on 82% · 10 kΩ (9)
PC1/RESETpin 24Connected to: A connector 36%
  • Pull-up to 5V on 91% · 10 kΩ (9), 4.7 kΩ (1)
UCAPpin 27Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (9)
UGNDpin 28Connected to: GND 100%
D+pin 29Connected to: Signal 100%
  • Series resistor on 91% · 22 Ω (10)
D-pin 30Connected to: Signal 100%
  • Series resistor on 91% · 22 Ω (10)
UVCCpin 31Connected to: 5V 100%
  • Decoupling capacitor on 73% · 100 nF (8), 4.7 µF (1)
AVCCpin 32Connected to: 5V 100%
  • Decoupling capacitor on 82% · 100 nF (8), 10 µF (1), 4.7 µF (1)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include QEZ by str-dst, Unnamed-3k v2 by kzrtn, Cec2usb by RedoXyde and GameHand by str-dst.

The ATMEGA32U2-AU in open source designs

The gallery holds 22 open source boards using the ATMEGA32U2-AU from 11 GitHub repositories; a typical one measures about 138.7 × 77.6 mm and carries around 75 components.

100% are two-layer designs, the rest use four layers or more, and 5% carry an open source license.

The most starred is QEZ by str-dst.

Parts used alongside the ATMEGA32U2-AU

Microcontrollers on boards using the ATMEGA32U2-AU

What boards using the ATMEGA32U2-AU are built for

ATMEGA32U2-AU: common questions

Where can I find a ATMEGA32U2-AU reference design?

Each of the 22 boards on this page is a real design using the ATMEGA32U2-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATMEGA32U2-AU XTAL1 pin connected?

The XTAL1 pin has a crystal on 11 of 11 designs, most often 16 MHz. Counted from the KiCad layouts of 11 open source designs using the ATMEGA32U2-AU.

How is the ATMEGA32U2-AU PC0/XTAL2 pin connected?

The PC0/XTAL2 pin has a crystal on 11 of 11 designs, most often 16 MHz. Counted from the KiCad layouts of 11 open source designs using the ATMEGA32U2-AU.

How is the ATMEGA32U2-AU UCAP pin connected?

The UCAP pin has a capacitor to GND on 11 of 11 designs, most often 1 µF. Counted from the KiCad layouts of 11 open source designs using the ATMEGA32U2-AU.

Which microcontrollers do boards using the ATMEGA32U2-AU use?

Most are built on AVR/Arduino (22).

How big is a typical board using the ATMEGA32U2-AU?

The median is 138.7 × 77.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATMEGA32U2-AU?

By GitHub stars, QEZ by str-dst, with 111 stars.

Can I simulate one of these boards using the ATMEGA32U2-AU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part