5 open source boards using the ATMEGA32U4-MUR

Real designs built with the ATMEGA32U4-MUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the ATMEGA32U4-MUR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATMEGA32U4-MUR connects to, and the resistors, capacitors and other passives placed on it.

  • The D- pin has a series resistor on 5 of 5 designs, most often 22 Ω.
  • The D+ pin has a series resistor on 5 of 5 designs, most often 22 Ω.
  • The UCAP pin has a capacitor to GND on 5 of 5 designs, most often 1 µF.
  • The RESET pin has a pull-up to 5V on 5 of 5 designs, most often 10 kΩ.
UVCCpin 2Connected to: 5V 100%
  • Decoupling capacitor on 60% · 1 µF (4), 100 nF (3), 10 µF (1)
D-pin 3Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (5)
D+pin 4Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (5)
UGNDpin 5Connected to: GND 100%
UCAPpin 6Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (5)
VBUSpin 7Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (3), 1 µF (2), 10 µF (1)
PB7pin 12Connected to: Not connected 60% · a signal 40%
RESETpin 13Connected to: A connector 80%
  • Pull-up to 5V on 100% · 10 kΩ (5)
VCCpin 14, 34Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (6)
GNDpin 15, 23, 35, 43, 45Connected to: GND 96%
XTAL2pin 16Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (3)
  • Capacitor to GND on 80% · 22 pF (4)
XTAL1pin 17Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (3)
  • Capacitor to GND on 80% · 22 pF (4)
AVCCpin 24, 44Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (10), 10 µF (1)
PC6pin 31Connected to: Not connected 60% · a signal 40%
HWB/PE2pin 33Connected to: Signal 80% · GND 20%
  • Resistor to GND on 80% · 10 kΩ (4)
AREFpin 42Connected to: Not connected 60% · a signal 40%
  • Capacitor to GND on 40% · 100 nF (2)

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Enclave by keyquesttech, Theboulevard by joedinkle, Mikeneko-65-pcb by takishim and Lunar65 by ItzZeNash.

The ATMEGA32U4-MUR in open source designs

The gallery holds 5 open source boards using the ATMEGA32U4-MUR from 5 GitHub repositories; a typical one measures about 257.2 × 94.2 mm and carries around 152 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Enclave by keyquesttech.

Parts used alongside the ATMEGA32U4-MUR

Microcontrollers on boards using the ATMEGA32U4-MUR

What boards using the ATMEGA32U4-MUR are built for

ATMEGA32U4-MUR: common questions

Where can I find a ATMEGA32U4-MUR reference design?

Each of the 5 boards on this page is a real design using the ATMEGA32U4-MUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the ATMEGA32U4-MUR D- pin?

The D- pin has a series resistor on 5 of 5 designs, most often 22 Ω. Counted from the KiCad layouts of 5 open source designs using the ATMEGA32U4-MUR.

What resistor goes on the ATMEGA32U4-MUR D+ pin?

The D+ pin has a series resistor on 5 of 5 designs, most often 22 Ω. Counted from the KiCad layouts of 5 open source designs using the ATMEGA32U4-MUR.

How is the ATMEGA32U4-MUR UCAP pin connected?

The UCAP pin has a capacitor to GND on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the ATMEGA32U4-MUR.

Which microcontrollers do boards using the ATMEGA32U4-MUR use?

Most are built on AVR/Arduino (5).

How big is a typical board using the ATMEGA32U4-MUR?

The median is 257.2 × 94.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATMEGA32U4-MUR?

By GitHub stars, Enclave by keyquesttech, with 32 stars.

Can I simulate one of these boards using the ATMEGA32U4-MUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part