4 open source boards using the ATmega8A-PU
Real designs built with the ATmega8A-PU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
AVRForth
oco2000
203.2 × 135.9 mm69 parts2LGPL-3.04AVR/Arduino
DuPAL Board
OddbitCoder
113 × 78.7 mm50 parts2LCC-BY-SA-4.00AVR/Arduino
DuPal DIP
DuPAL-PAL-DUmper
113 × 78.7 mm50 parts2LCC-BY-SA-4.057AVR/Arduino
FM radio atmega 8
411568
77.5 × 52.1 mm19 parts2LMIT3
The ATmega8A-PU in open source designs
The gallery holds 4 open source boards using the ATmega8A-PU from 4 GitHub repositories; a typical one measures about 113 × 78.7 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is DuPal DIP by DuPAL-PAL-DUmper.
Parts used alongside the ATmega8A-PU
Microcontrollers on boards using the ATmega8A-PU
What boards using the ATmega8A-PU are built for
ATmega8A-PU: common questions
Where can I find a ATmega8A-PU reference design?
Each of the 4 boards on this page is a real design using the ATmega8A-PU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ATmega8A-PU?
The 20 Pin PAL, 24 Pin PAL, 74HC166, 74HC595 and L7805 appear in the most repositories here.
Which microcontrollers do boards using the ATmega8A-PU use?
Most are built on AVR/Arduino (4).
How big is a typical board using the ATmega8A-PU?
The median is 113 × 78.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATmega8A-PU?
By GitHub stars, DuPal DIP by DuPAL-PAL-DUmper, with 57 stars.
Can I simulate one of these boards using the ATmega8A-PU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.