4 open source boards using the ATSAMD21E18A-AFT

Real designs built with the ATSAMD21E18A-AFT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ATSAMD21E18A-AFT in open source designs

The gallery holds 4 open source boards using the ATSAMD21E18A-AFT from 3 GitHub repositories; a typical one measures about 65 × 24.4 mm and carries around 49 components.

100% use four copper layers or more, and 25% carry an open source license.

The most starred is Bias generator LT8362 by OpenSiPM.

Microcontrollers on boards using the ATSAMD21E18A-AFT

What boards using the ATSAMD21E18A-AFT are built for

ATSAMD21E18A-AFT: common questions

Where can I find a ATSAMD21E18A-AFT reference design?

Each of the 4 boards on this page is a real design using the ATSAMD21E18A-AFT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ATSAMD21E18A-AFT?

The MIC5317-3.3YM5-TR, LT8364EMSE#TRPBF, MCP47FEB22A2-E/ST, MCP6C02T-020E/CHY and RT9072B appear in the most repositories here.

Which microcontrollers do boards using the ATSAMD21E18A-AFT use?

Most are built on Microchip SAM (4).

How big is a typical board using the ATSAMD21E18A-AFT?

The median is 65 × 24.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the ATSAMD21E18A-AFT?

By GitHub stars, Bias generator LT8362 by OpenSiPM, with 44 stars.

Can I simulate one of these boards using the ATSAMD21E18A-AFT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part