4 open source boards using the MIC5317-3.3YM5-TR
Real designs built with the MIC5317-3.3YM5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Bias generator LT8362
OpenSiPM
37.6 × 30.6 mm45 parts4LMIT44Microchip SAM
PLL
OpenSiPM
74.8 × 44.5 mm73 parts4LNo license0Microchip SAM
Bias control lt8364-linear two usb
OpenSiPM
65 × 18.1 mm51 parts4LNo license7Microchip SAM
Bias control lt8364-linear
OpenSiPM
65 × 18.1 mm47 parts4LNo license7
The MIC5317-3.3YM5-TR in open source designs
The gallery holds 4 open source boards using the MIC5317-3.3YM5-TR from 3 GitHub repositories; a typical one measures about 65 × 24.4 mm and carries around 49 components.
100% use four copper layers or more, and 25% carry an open source license.
The most starred is Bias generator LT8362 by OpenSiPM.
Parts used alongside the MIC5317-3.3YM5-TR
Microcontrollers on boards using the MIC5317-3.3YM5-TR
What boards using the MIC5317-3.3YM5-TR are built for
MIC5317-3.3YM5-TR: common questions
Where can I find a MIC5317-3.3YM5-TR reference design?
Each of the 4 boards on this page is a real design using the MIC5317-3.3YM5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MIC5317-3.3YM5-TR?
The ATSAMD21E18A-AFT, LT8364EMSE#TRPBF, MCP47FEB22A2-E/ST, MCP6C02T-020E/CHY and RT9072B appear in the most repositories here.
Which microcontrollers do boards using the MIC5317-3.3YM5-TR use?
Most are built on Microchip SAM (4).
How big is a typical board using the MIC5317-3.3YM5-TR?
The median is 65 × 24.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the MIC5317-3.3YM5-TR?
By GitHub stars, Bias generator LT8362 by OpenSiPM, with 44 stars.
Can I simulate one of these boards using the MIC5317-3.3YM5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.