9 open source boards using the ATtiny13A-P

Real designs built with the ATtiny13A-P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ATtiny13A-P

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ATtiny13A-P connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 9 designs, most often 100 nF (then 10 µF).
PB3pin 2Connected to: A connector 44%
  • Series resistor on 33% · 220 Ω (2), 100 Ω (1), 10 kΩ (1)
GNDpin 4Connected to: GND 100%
PB0pin 5Connected to: A connector 44%
  • Series resistor on 33% · 220 Ω (1)
PB1pin 6Connected to: A connector 44%
  • Series resistor on 33% · 220 Ω (2)
PB2pin 7Connected to: A connector 33%
  • Series resistor on 33% · 220 Ω (2)
VCCpin 8Connected to: VCC 89%
  • Decoupling capacitor on 44% · 100 nF (3), 10 µF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Keyboard by danwerner21, Cart by digilogistist, ArcDice by VorosEgyes and AlteFabrik191126 by 25mmHg.

The ATtiny13A-P in open source designs

The gallery holds 9 open source boards using the ATtiny13A-P from 9 GitHub repositories; a typical one measures about 70 × 48.7 mm and carries around 21 components.

100% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.

The most starred is Keyboard by danwerner21.

Microcontrollers on boards using the ATtiny13A-P

What boards using the ATtiny13A-P are built for

ATtiny13A-P: common questions

Where can I find a ATtiny13A-P reference design?

Each of the 9 boards on this page is a real design using the ATtiny13A-P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ATtiny13A-P VCC pin?

The VCC pin has a decoupling capacitor on 4 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the ATtiny13A-P.

Which microcontrollers do boards using the ATtiny13A-P use?

Most are built on AVR/Arduino (9).

How big is a typical board using the ATtiny13A-P?

The median is 70 × 48.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATtiny13A-P?

By GitHub stars, Keyboard by danwerner21, with 50 stars.

Can I simulate one of these boards using the ATtiny13A-P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part