7 open source boards using the B0505S-1WR3

Real designs built with the B0505S-1WR3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the B0505S-1WR3

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the B0505S-1WR3 connects to, and the resistors, capacitors and other passives placed on it.

  • The -VIN_1 pin is tied to GND on 5 of 5 designs.
  • The -VOUT_3 pin is tied to GND on 4 of 5 designs.
  • The +VIN_2 pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 220 µF).
  • The +VOUT_4 pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 10 µF).
-VIN_1pin 1Connected to: GND 100%
+VIN_2pin 2Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 60% · 4.7 µF (2), 220 µF (1), 10 µF (1)
-VOUT_3pin 3Connected to: GND 80% · a signal 20%
+VOUT_4pin 4Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 60% · 4.7 µF (2), 10 µF (2), 100 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CANchovy by fred314159265, BMS-Master-STM32-Nucleo-G474RE by gabrielfbdiniz, InduLink-485 by 8aChristian and Pura mainboard-0805-0.3 by rvbcrs.

The B0505S-1WR3 in open source designs

The gallery holds 7 open source boards using the B0505S-1WR3 from 6 GitHub repositories; a typical one measures about 62.9 × 55 mm and carries around 21 components.

50% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is CANchovy by fred314159265.

Parts used alongside the B0505S-1WR3

Microcontrollers on boards using the B0505S-1WR3

B0505S-1WR3: common questions

Where can I find a B0505S-1WR3 reference design?

Each of the 7 boards on this page is a real design using the B0505S-1WR3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the B0505S-1WR3 -VIN_1 pin connected?

The -VIN_1 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the B0505S-1WR3.

How is the B0505S-1WR3 -VOUT_3 pin connected?

The -VOUT_3 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the B0505S-1WR3.

What decoupling capacitors do designs use on the B0505S-1WR3 +VIN_2 pin?

The +VIN_2 pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 220 µF). Counted from the KiCad layouts of 5 open source designs using the B0505S-1WR3.

Which microcontrollers do boards using the B0505S-1WR3 use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the B0505S-1WR3?

The median is 62.9 × 55 mm, and 50% are two-layer designs.

What is the most popular open source board using the B0505S-1WR3?

By GitHub stars, CANchovy by fred314159265, with 7 stars.

Can I simulate one of these boards using the B0505S-1WR3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part