10 open source boards using the BQ25504
Real designs built with the BQ25504, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Solar nRF.kicad pro
PocketConcepts
35.9 × 35.5 mm53 parts2LNo license341Nordic nRF
Cweep
cjshearer
108 × 94.7 mm53 parts2LMIT12BQStripped
bootchk
9 × 9 mm18 parts2LNo license6LowLoRa
SorenGilkeyJohnson
23.4 × 25.4 mm64 parts4LCERN-OHL-S-2.03AVR/Arduino
Omamori
felixmark
25 × 35 mm34 parts2LNo license2ESP32
Tux v02
tux-friend
25 × 25 mm60 parts2LGPL-3.018SolarPowerSupply
Octanis3
59.9 × 34.5 mm49 parts2LMIT2Bq25504
ojousima
35 × 35 mm27 parts2LCustom license1Rx antenna
Saatvik-Aggarwal
30 × 30 mm31 parts4LMIT0Nordic nRF
Techno Buffalo
OklahomaOpenSourceHardware
88.4 × 62.5 mm60 parts2LNo license3
How designs wire the BQ25504
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the BQ25504 connects to, and the resistors, capacitors and other passives placed on it.
- The VREF_SAMP pin has a capacitor to GND on 8 of 10 designs, most often 10 nF.
- The VBAT_OV pin has a series resistor on 8 of 10 designs, most often 4.7 MΩ (then 5.62 MΩ).
- The VBAT_OV pin has a resistor to GND on 8 of 10 designs, most often 4.7 MΩ (then 4.42 MΩ).
- The VRDIV pin has a series resistor on 8 of 10 designs, most often 3.3 MΩ (then 4.7 MΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1, 13 | Connected to: GND 100% | — |
| VIN_DCpin 2 | Connected to: A connector 30% · PD 30% |
|
| VOC_SAMPpin 3 | Connected to: Signal 100% |
|
| VREF_SAMPpin 4 | Connected to: Signal 90% |
|
| OT_PROGpin 5 | Connected to: GND 90% | — |
| VBAT_OVpin 6 | Connected to: Signal 90% |
|
| VRDIVpin 7 | Connected to: Signal 90% |
|
| VBAT_UVpin 8 | Connected to: Signal 90% |
|
| OK_HYSTpin 9 | Connected to: Signal 80% |
|
| OK_PROGpin 10 | Connected to: Signal 80% |
|
| AVSSpin 12 | Connected to: GND 100% | — |
| VBATpin 14 | Connected to: Signal 60% · VBAT 40% |
|
| VSTORpin 15 | Connected to: Signal 90% |
|
| LBSTpin 16 | Connected to: Signal 90% |
|
| PADpin 17 | Connected to: GND 90% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Solar nRF.kicad pro by PocketConcepts, Tux v02 by tux-friend, Cweep by cjshearer and BQStripped by bootchk.
The BQ25504 in open source designs
The gallery holds 10 open source boards using the BQ25504 from 10 GitHub repositories; a typical one measures about 32.5 × 34.8 mm and carries around 51 components.
80% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Solar nRF.kicad pro by PocketConcepts.
Microcontrollers on boards using the BQ25504
What boards using the BQ25504 are built for
BQ25504: common questions
Where can I find a BQ25504 reference design?
Each of the 10 boards on this page is a real design using the BQ25504. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ25504 VREF_SAMP pin connected?
The VREF_SAMP pin has a capacitor to GND on 8 of 10 designs, most often 10 nF. Counted from the KiCad layouts of 10 open source designs using the BQ25504.
What resistor goes on the BQ25504 VBAT_OV pin?
The VBAT_OV pin has a series resistor on 8 of 10 designs, most often 4.7 MΩ (then 5.62 MΩ). Counted from the KiCad layouts of 10 open source designs using the BQ25504.
What resistor goes on the BQ25504 VRDIV pin?
The VRDIV pin has a series resistor on 8 of 10 designs, most often 3.3 MΩ (then 4.7 MΩ). Counted from the KiCad layouts of 10 open source designs using the BQ25504.
Which microcontrollers do boards using the BQ25504 use?
Most are built on Nordic nRF (3), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the BQ25504?
The median is 32.5 × 34.8 mm, and 80% are two-layer designs.
What is the most popular open source board using the BQ25504?
By GitHub stars, Solar nRF.kicad pro by PocketConcepts, with 341 stars.
Can I simulate one of these boards using the BQ25504 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.