16 open source boards using the BQ27441DRZR-G1A
Real designs built with the BQ27441DRZR-G1A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Electronics-Design-Exploiteers-Hacker-Pager
exploiteers
108.5 × 79 mm181 parts4LCERN-OHL-S-2.027RP2040/RP2350
MokyaLora
tengigabytes
66 × 105 mm328 parts6LCustom license7ESP32
Soldered Inkplate 4 TEMPERA with glass panel
SolderedElectronics
72 × 78 mm246 parts4LTAPR-OHL-1.05STM32
Open running watch hw
fuad1502
41 × 61.9 mm208 parts4LNo license5PCB B
dragondgold
54 × 54 mm68 parts2LGPL-3.05Nervous-EDA
sensors-inl
26 × 40 mm46 parts2LMIT3Nervous-ECG
sensors-inl
26 × 40 mm60 parts2LMIT2PCB B
dragondgold
54 × 54 mm75 parts2LGPL-3.01STM32
Uq phone
JamesB-Wood
45 × 108 mm172 parts6LCERN-OHL-S-2.00ESP32
Surprise
marmbrus
100 × 91.4 mm146 parts4LNo license0ESP32
Poket
kaorii-ako
80 × 54 mm100 parts4LMIT0RP2040/RP2350
AT-HUB-Recharged
Rehabilitation-Innovation
100 × 55 mm95 parts4LNo license0AVR/Arduino
Mobile Monitor Redesign
deogratius2phantom
49 × 39.1 mm90 parts4LNo license0ESP32
Soldered Inkplate 4 TEMPERA with glass panel panel
SolderedElectronics
1.9 × 12 mm246 parts4LTAPR-OHL-1.05Nordic nRF
Bench ble lipo sensor 5eab0a5d
mrcha033
50 × 35 mm19 parts2LApache-2.02Nordic nRF
Bench ble lipo sensor b204035a
mrcha033
50 × 35 mm19 parts2LApache-2.02
How designs wire the BQ27441DRZR-G1A
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the BQ27441DRZR-G1A connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 13 of 14 designs, most often 470 nF (then 1 µF).
- The BIN pin has a resistor to GND on 11 of 13 designs, most often 10 kΩ.
- The SDA pin has a pull-up to 3.3V on 10 of 14 designs, most often 10 kΩ (then 4.7 kΩ).
- The SCL pin has a pull-up to 3.3V on 10 of 14 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: The microcontroller 50%, a connector 21% |
|
| SCLpin 2 | Connected to: The microcontroller 50%, a connector 21% |
|
| VSSpin 3 | Connected to: GND 93% | — |
| NCpin 4, 9, 11 | Connected to: Not connected 73% · GND 24% | — |
| VDDpin 5 | Connected to: Signal 71% · VDD 29% |
|
| BATpin 6 | Connected to: A connector 29% · VBAT 43% |
|
| SRPpin 8 | Connected to: A connector 43% · VBAT 36% |
|
| BINpin 10 | Connected to: Signal 92% |
|
| GPOUTpin 12 | Connected to: Signal 85% · not connected 15% |
|
| EPpin 13 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Electronics-Design-Exploiteers-Hacker-Pager by exploiteers, MokyaLora by tengigabytes, PCB B by dragondgold and Open running watch hw by fuad1502.
The BQ27441DRZR-G1A in open source designs
The gallery holds 16 open source boards using the BQ27441DRZR-G1A from 14 GitHub repositories; a typical one measures about 52 × 54 mm and carries around 98 components.
63% use four copper layers or more, and 69% carry an open source license.
The most starred is Electronics-Design-Exploiteers-Hacker-Pager by exploiteers.
Parts used alongside the BQ27441DRZR-G1A
Microcontrollers on boards using the BQ27441DRZR-G1A
What boards using the BQ27441DRZR-G1A are built for
BQ27441DRZR-G1A: common questions
Where can I find a BQ27441DRZR-G1A reference design?
Each of the 16 boards on this page is a real design using the BQ27441DRZR-G1A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ27441DRZR-G1A VDD pin connected?
The VDD pin has a capacitor to GND on 13 of 14 designs, most often 470 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the BQ27441DRZR-G1A.
What resistor goes on the BQ27441DRZR-G1A BIN pin?
The BIN pin has a resistor to GND on 11 of 13 designs, most often 10 kΩ. Counted from the KiCad layouts of 14 open source designs using the BQ27441DRZR-G1A.
What pull-up resistor is used on the BQ27441DRZR-G1A SDA pin?
The SDA pin has a pull-up to 3.3V on 10 of 14 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 14 open source designs using the BQ27441DRZR-G1A.
What parts are used alongside the BQ27441DRZR-G1A?
The CH340C, ADP2108AUJZ-3.3-R7, AP2112K-3.3TRG1, BQ24074RGTT and EVP-AA502W appear in the most repositories here.
Which microcontrollers do boards using the BQ27441DRZR-G1A use?
Most are built on ESP32 (5), Nordic nRF (2), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the BQ27441DRZR-G1A?
The median is 52 × 54 mm, and 38% are two-layer designs.
What is the most popular open source board using the BQ27441DRZR-G1A?
By GitHub stars, Electronics-Design-Exploiteers-Hacker-Pager by exploiteers, with 27 stars.
Can I simulate one of these boards using the BQ27441DRZR-G1A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.