7 open source boards using the BQ76952PFBR
Real designs built with the BQ76952PFBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Bms c1
LibreSolar
135 × 70 mm167 parts4LCERN-OHL-W-2.0277STM32
BMS-Version-4
0hasant
100 × 100 mm238 parts2LNo license2TI MSP430/CC
Battery-Management system
LikithaMuralidhar
134.6 × 154.9 mm303 parts2LNo license0ESP32
Libre Solar BMS C1
PawelSroczynski
135 × 70 mm166 parts4LGPL-3.00ESP32
Libre Solar BMS C1
shinemohans061
135 × 70 mm166 parts4LNo license0STM32
Bottom
StanZalewski
83.3 × 88.1 mm115 parts4LNo license0- schematic only · 159 parts
SmartBMS Active balancing
koko69420
159 partsNo license0
How designs wire the BQ76952PFBR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the BQ76952PFBR connects to, and the resistors, capacitors and other passives placed on it.
- The VC15 pin has a series capacitor on 6 of 6 designs, most often 220 nF.
- The VC15 pin has a series resistor on 6 of 6 designs, most often 20 Ω (then 100 Ω).
- The VC14 pin has a series capacitor on 6 of 6 designs, most often 220 nF.
- The VC14 pin has a series resistor on 6 of 6 designs, most often 20 Ω (then 100 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VC15pin 1 | Connected to: Signal 100% |
|
| VC14pin 2 | Connected to: Signal 100% |
|
| VC13pin 3 | Connected to: Signal 100% |
|
| VC12pin 4 | Connected to: Signal 100% |
|
| VC11pin 5 | Connected to: Signal 100% |
|
| VC10pin 6 | Connected to: Signal 100% |
|
| VC9pin 7 | Connected to: Signal 100% |
|
| VC8pin 8 | Connected to: Signal 100% |
|
| VC7pin 9 | Connected to: Signal 100% |
|
| VC6pin 10 | Connected to: Signal 100% |
|
| VC5pin 11 | Connected to: Signal 100% |
|
| VC4pin 12 | Connected to: Signal 100% |
|
| VC3pin 13 | Connected to: Signal 100% |
|
| VC2pin 14 | Connected to: Signal 100% |
|
| VC1pin 15 | Connected to: Signal 100% |
|
| VC0pin 16 | Connected to: Signal 100% |
|
| VSSpin 17 | Connected to: GND 83% · a signal 17% | — |
| SRPpin 18 | Connected to: Signal 100% |
|
| NCpin 19, 44 | Connected to: Not connected 100% | — |
| SRNpin 20 | Connected to: Signal 100% |
|
| TS1pin 21 | Connected to: A connector 83% |
|
| TS2pin 22 | Connected to: Signal 100% |
|
| TS3pin 23 | Connected to: A connector 67% |
|
| REG18pin 24 | Connected to: Signal 100% |
|
| ALERTpin 25 | Connected to: The microcontroller 67% · GND 17% |
|
| SCLpin 26 | Connected to: The microcontroller 67%, a connector 50% |
|
| SDApin 27 | Connected to: The microcontroller 67%, a connector 50% |
|
| CFETOFFpin 29 | Connected to: Not connected 67% · a signal 33% | — |
| DFETOFFpin 30 | Connected to: Signal 67% · not connected 17% · GND 17% |
|
| DCHGpin 31 | Connected to: Signal 83% · not connected 17% |
|
| RST_SHUTpin 33 | Connected to: GND 50% · not connected 17% · a signal 33% |
|
| REG2pin 34 | Connected to: Signal 50% · not connected 33% · 5V 17% |
|
| REG1pin 35 | Connected to: Signal 67% · not connected 33% |
|
| REGINpin 36 | Connected to: GND 67% · a signal 33% | — |
| BREGpin 37 | Connected to: GND 67% · a signal 33% |
|
| FUSEpin 38 | Connected to: Signal 83% · not connected 17% |
|
| PDSGpin 39 | Connected to: Signal 67% · not connected 33% |
|
| PCHGpin 40 | Connected to: Not connected 100% | — |
| LDpin 41 | Connected to: Signal 83% · GND 17% |
|
| PACKpin 42 | Connected to: Signal 100% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bms c1 by LibreSolar, BMS-Version-4 by 0hasant, Battery-Management system by LikithaMuralidhar and Libre Solar BMS C1 by PawelSroczynski.
The BQ76952PFBR in open source designs
The gallery holds 7 open source boards using the BQ76952PFBR from 7 GitHub repositories; a typical one measures about 134.8 × 79 mm and carries around 166 components.
67% use four copper layers or more, and 29% carry an open source license.
The most starred is Bms c1 by LibreSolar.
Parts used alongside the BQ76952PFBR
Microcontrollers on boards using the BQ76952PFBR
What boards using the BQ76952PFBR are built for
BQ76952PFBR: common questions
Where can I find a BQ76952PFBR reference design?
Each of the 7 boards on this page is a real design using the BQ76952PFBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ76952PFBR VC15 pin connected?
The VC15 pin has a series capacitor on 6 of 6 designs, most often 220 nF. Counted from the KiCad layouts of 6 open source designs using the BQ76952PFBR.
How is the BQ76952PFBR VC14 pin connected?
The VC14 pin has a series capacitor on 6 of 6 designs, most often 220 nF. Counted from the KiCad layouts of 6 open source designs using the BQ76952PFBR.
How is the BQ76952PFBR VC13 pin connected?
The VC13 pin has a series capacitor on 6 of 6 designs, most often 220 nF. Counted from the KiCad layouts of 6 open source designs using the BQ76952PFBR.
What parts are used alongside the BQ76952PFBR?
The ESP32-C3-MINI-1-N4, LMR38010SDDAR, SN65HVD230DR and SN65HVD75DR appear in the most repositories here.
Which microcontrollers do boards using the BQ76952PFBR use?
Most are built on ESP32 (3), STM32 (2) and TI MSP430/CC (1).
How big is a typical board using the BQ76952PFBR?
The median is 134.8 × 79 mm, and 33% are two-layer designs.
What is the most popular open source board using the BQ76952PFBR?
By GitHub stars, Bms c1 by LibreSolar, with 277 stars.
Can I simulate one of these boards using the BQ76952PFBR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.