4 open source boards using the C108207
Real designs built with the C108207, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Cell sim
atopile
220 × 110 mm1152 parts4LMIT24RP2040/RP2350
Main board
saawsm
198.1 × 61 mm233 parts4LGPL-3.013Pcb analog feedback loop
jc-roth
100 × 100 mm109 parts4LNo license0RP2040/RP2350
Digifant2-pruefstand
designer2k2
144 × 150 mm73 parts2LMIT0
The C108207 in open source designs
The gallery holds 4 open source boards using the C108207 from 4 GitHub repositories; a typical one measures about 171.1 × 105 mm and carries around 171 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is Cell sim by atopile.
Parts used alongside the C108207
Microcontrollers on boards using the C108207
What boards using the C108207 are built for
C108207: common questions
Where can I find a C108207 reference design?
Each of the 4 boards on this page is a real design using the C108207. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C108207 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the C108207?
The median is 171.1 × 105 mm, and 25% are two-layer designs.
What is the most popular open source board using the C108207?
By GitHub stars, Cell sim by atopile, with 24 stars.
Can I simulate one of these boards using the C108207 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.