7 open source boards using the C32574
Real designs built with the C32574, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
41 1350
cyril279
238.7 × 95.3 mm131 parts2LMIT74Schiffre nrf
Bemeier
52 × 27.3 mm24 parts2LMIT1ESP32
Quadcopter
markusheimerl
75.1 × 75.1 mm60 parts2LUnlicense0ESP32
FliphackV1
ChladpavPy
53 × 76 mm58 parts2LMIT0AVR/Arduino
R3926lp
cyril279
238.7 × 94.9 mm120 parts2LMIT74Nordic nRF
One42
cyril279
252.3 × 111.8 mm113 parts2LMIT74R41l2
cyril279
251.4 × 103.7 mm84 parts2LMIT74
The C32574 in open source designs
The gallery holds 7 open source boards using the C32574 from 4 GitHub repositories; a typical one measures about 238.7 × 94.9 mm and carries around 84 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is 41 1350 pcb by cyril279.
Parts used alongside the C32574
Microcontrollers on boards using the C32574
What boards using the C32574 are built for
C32574: common questions
Where can I find a C32574 reference design?
Each of the 7 boards on this page is a real design using the C32574. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C32574 use?
Most are built on AVR/Arduino (2), ESP32 (2) and Nordic nRF (1).
How big is a typical board using the C32574?
The median is 238.7 × 94.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the C32574?
By GitHub stars, 41 1350 pcb by cyril279, with 74 stars.
Can I simulate one of these boards using the C32574 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.