4 open source boards using the C86534
Real designs built with the C86534, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Mikoto
zhiayang
18 × 33.3 mm53 parts4LApache-2.0358Schiffre nrf
Bemeier
52 × 27.3 mm24 parts2LMIT1ESP32
FliphackV1
ChladpavPy
53 × 76 mm58 parts2LMIT0Nordic nRF
Mikoto
yangxing844
18 × 33.3 mm55 parts4LNo license1
The C86534 in open source designs
The gallery holds 4 open source boards using the C86534 from 4 GitHub repositories; a typical one measures about 35 × 33.3 mm and carries around 54 components.
50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Mikoto by zhiayang.
Parts used alongside the C86534
Microcontrollers on boards using the C86534
What boards using the C86534 are built for
C86534: common questions
Where can I find a C86534 reference design?
Each of the 4 boards on this page is a real design using the C86534. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the C86534?
The C15464, C1851953, C32574, ESDR0502NMUTAG and MAX17048 appear in the most repositories here.
Which microcontrollers do boards using the C86534 use?
Most are built on Nordic nRF (2) and ESP32 (1).
How big is a typical board using the C86534?
The median is 35 × 33.3 mm, and 50% are two-layer designs.
What is the most popular open source board using the C86534?
By GitHub stars, Mikoto by zhiayang, with 358 stars.
Can I simulate one of these boards using the C86534 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.