4 open source boards using the CC1120
Real designs built with the CC1120, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
RCCAR IF Board GPS
vedderb
81 × 55 mm170 parts4LGPL-3.0145STM32
UPSat COMMS
Ki365
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20STM32
UPSat COMMS
mcgillspace
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20STM32
UPSat COMMS
npe9
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20
The CC1120 in open source designs
The gallery holds 4 open source boards using the CC1120 from 4 GitHub repositories; a typical one measures about 92.5 × 92.5 mm and carries around 190 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is RCCAR IF Board GPS by vedderb.
Parts used alongside the CC1120
Microcontrollers on boards using the CC1120
What boards using the CC1120 are built for
CC1120: common questions
Where can I find a CC1120 reference design?
Each of the 4 boards on this page is a real design using the CC1120. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the CC1120?
The ADT7420, FA_128_, OPA320, RF5110G and STM32F407VG appear in the most repositories here.
Which microcontrollers do boards using the CC1120 use?
Most are built on STM32 (4).
How big is a typical board using the CC1120?
The median is 92.5 × 92.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the CC1120?
By GitHub stars, RCCAR IF Board GPS by vedderb, with 145 stars.
Can I simulate one of these boards using the CC1120 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.