5 open source boards using the RF5110G
Real designs built with the RF5110G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
UPSat COMMS
Ki365
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20STM32
UPSat COMMS
mcgillspace
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20STM32
UPSat COMMS
npe9
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20NXP
Radio
cculpepper
40.9 × 25 mm89 parts4LNo license4NXP
HardwareRev1
cculpepper
64 × 45.9 mm59 parts2LNo license4
The RF5110G in open source designs
The gallery holds 5 open source boards using the RF5110G from 4 GitHub repositories; a typical one measures about 92.5 × 92.5 mm and carries around 190 components.
80% use four copper layers or more, and 60% carry an open source license.
The most starred is Radio by cculpepper.
Parts used alongside the RF5110G
What boards using the RF5110G are built for
RF5110G: common questions
Where can I find a RF5110G reference design?
Each of the 5 boards on this page is a real design using the RF5110G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RF5110G?
The ADT7420, CC1120, FA_128_, OPA320 and STM32F407VG appear in the most repositories here.
Which microcontrollers do boards using the RF5110G use?
Most are built on STM32 (3) and NXP (2).
How big is a typical board using the RF5110G?
The median is 92.5 × 92.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the RF5110G?
By GitHub stars, Radio by cculpepper, with 4 stars.
Can I simulate one of these boards using the RF5110G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.