4 open source boards using the TPS79930
Real designs built with the TPS79930, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
UPSat COMMS
Ki365
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20STM32
UPSat COMMS
mcgillspace
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20STM32
UPSat COMMS
npe9
92.5 × 92.5 mm190 parts4LCERN-OHL-1.20COM
skycan
50 × 50 mm66 parts2LCustom license0
The TPS79930 in open source designs
The gallery holds 4 open source boards using the TPS79930 from 4 GitHub repositories; a typical one measures about 92.5 × 92.5 mm and carries around 190 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is UPSat COMMS by Ki365.
Parts used alongside the TPS79930
Microcontrollers on boards using the TPS79930
TPS79930: common questions
Where can I find a TPS79930 reference design?
Each of the 4 boards on this page is a real design using the TPS79930. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS79930?
The ADT7420, CC1120, FA_128_, OPA320 and RF5110G appear in the most repositories here.
Which microcontrollers do boards using the TPS79930 use?
Most are built on STM32 (3).
How big is a typical board using the TPS79930?
The median is 92.5 × 92.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the TPS79930?
By GitHub stars, UPSat COMMS by Ki365, with 0 stars.
Can I simulate one of these boards using the TPS79930 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.