6 open source boards using the MCP16311/2

Real designs built with the MCP16311/2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The MCP16311/2 in open source designs

The gallery holds 6 open source boards using the MCP16311/2 from 4 GitHub repositories; a typical one measures about 74 × 54.5 mm and carries around 85 components.

67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is RCCAR IF Board GPS by vedderb.

Microcontrollers on boards using the MCP16311/2

What boards using the MCP16311/2 are built for

MCP16311/2: common questions

Where can I find a MCP16311/2 reference design?

Each of the 6 boards on this page is a real design using the MCP16311/2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MCP16311/2?

The CC2520, MPU9150, STM32F40X_LQFP100, STM32F40X_LQFP64 and TJA1051TK-3 appear in the most repositories here.

Which microcontrollers do boards using the MCP16311/2 use?

Most are built on STM32 (5).

How big is a typical board using the MCP16311/2?

The median is 74 × 54.5 mm, and 67% are two-layer designs.

What is the most popular open source board using the MCP16311/2?

By GitHub stars, RCCAR IF Board GPS by vedderb, with 145 stars.

Can I simulate one of these boards using the MCP16311/2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part