4 open source boards using the CD74HC4514M96

Real designs built with the CD74HC4514M96, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The CD74HC4514M96 in open source designs

The gallery holds 4 open source boards using the CD74HC4514M96 from 3 GitHub repositories; a typical one measures about 164.3 × 105.4 mm and carries around 184 components.

100% use four copper layers or more, and 75% carry an open source license.

The most starred is K9HZ 100W 11band LPF-Control by DRWJSCHMIDT.

CD74HC4514M96: common questions

Where can I find a CD74HC4514M96 reference design?

Each of the 4 boards on this page is a real design using the CD74HC4514M96. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the CD74HC4514M96?

The 74HC237, AD7991YRJZ, AD8307, L7808 and LM1117T-3.3 appear in the most repositories here.

How big is a typical board using the CD74HC4514M96?

The median is 164.3 × 105.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the CD74HC4514M96?

By GitHub stars, K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, with 18 stars.

Can I simulate one of these boards using the CD74HC4514M96 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part