6 open source boards using the 74HC237
Real designs built with the 74HC237, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TI MSP430/CC
Big Red Satellite Flight Computer
Big-Red-Sat
81.1 × 75 mm243 parts4LCC-BY-SA-4.06Analog via
starlingcode
213.5 × 128.5 mm269 parts4LCC-BY-NC-4.00Yet-Another-Nixie-Clock-Face
afonsus1997
200 × 70 mm67 parts2LMIT0K9HZ 100W 11band LPF-Control
DRWJSCHMIDT
100 × 100 mm150 parts4LNo license18K9HZ 100W 11band LPF-Control
K0RGI
100 × 100 mm150 parts4LGPL-3.01Seial Model Railroad Control
DavidMFlynn
60 × 60 mm30 parts2LMIT1
How designs wire the 74HC237
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HC237 connects to, and the resistors, capacitors and other passives placed on it.
- The LE pin is tied to GND on 5 of 6 designs.
- The E2 pin is tied to 5V on 5 of 6 designs.
- The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
- The E1 pin is tied to GND on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| LEpin 4 | Connected to: GND 83% · a signal 17% | — |
| E1pin 5 | Connected to: GND 67% · a signal 33% | — |
| E2pin 6 | Connected to: 5V 83% · a signal 17% |
|
| Y7pin 7 | Connected to: Not connected 67% · a signal 33% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| Y6pin 9 | Connected to: Not connected 50% · a signal 50% |
|
| Y5pin 10 | Connected to: Not connected 50% · a signal 50% |
|
| Y4pin 11 | Connected to: Not connected 50% · a signal 50% |
|
| Y3pin 12 | Connected to: ULN2803C 33% |
|
| Y2pin 13 | Connected to: ULN2803C 33% |
|
| Y1pin 14 | Connected to: ULN2803C 33% |
|
| Y0pin 15 | Connected to: ULN2803C 33% |
|
| VCCpin 16 | Connected to: 5V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, Big Red Satellite Flight Computer by Big-Red-Sat, Seial Model Railroad Control by DavidMFlynn and K9HZ 100W 11band LPF-Control by K0RGI.
The 74HC237 in open source designs
The gallery holds 6 open source boards using the 74HC237 from 6 GitHub repositories; a typical one measures about 100 × 87.5 mm and carries around 150 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is K9HZ 100W 11band LPF-Control by DRWJSCHMIDT.
Parts used alongside the 74HC237
Microcontrollers on boards using the 74HC237
What boards using the 74HC237 are built for
74HC237: common questions
Where can I find a 74HC237 reference design?
Each of the 6 boards on this page is a real design using the 74HC237. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HC237 LE pin connected?
The LE pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74HC237.
How is the 74HC237 E2 pin connected?
The E2 pin is tied to 5V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74HC237.
What decoupling capacitors do designs use on the 74HC237 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74HC237.
What parts are used alongside the 74HC237?
The AD7991YRJZ, AD8307, CD74HC4514M96, L7808 and LM1117T-3.3 appear in the most repositories here.
Which microcontrollers do boards using the 74HC237 use?
Most are built on TI MSP430/CC (1).
How big is a typical board using the 74HC237?
The median is 100 × 87.5 mm, and 33% are two-layer designs.
What is the most popular open source board using the 74HC237?
By GitHub stars, K9HZ 100W 11band LPF-Control by DRWJSCHMIDT, with 18 stars.
Can I simulate one of these boards using the 74HC237 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.