1 open source board using the Clone_Pro_Mini_Socket_NoSPH
Real designs built with the Clone_Pro_Mini_Socket_NoSPH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
red-scorpThe Clone_Pro_Mini_Socket_NoSPH in open source designs
The gallery holds 1 open source boards using the Clone_Pro_Mini_Socket_NoSPH from 1 GitHub repository; a typical one measures about 57.2 × 53.3 mm and carries around 62 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RP2040-PinTest by red-scorp.
Microcontrollers on boards using the Clone_Pro_Mini_Socket_NoSPH
Clone_Pro_Mini_Socket_NoSPH: common questions
Where can I find a Clone_Pro_Mini_Socket_NoSPH reference design?
Each of the 1 boards on this page is a real design using the Clone_Pro_Mini_Socket_NoSPH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Clone_Pro_Mini_Socket_NoSPH use?
Most are built on AVR/Arduino (1).
How big is a typical board using the Clone_Pro_Mini_Socket_NoSPH?
The median is 57.2 × 53.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the Clone_Pro_Mini_Socket_NoSPH?
By GitHub stars, RP2040-PinTest by red-scorp, with 1 stars.
Can I simulate one of these boards using the Clone_Pro_Mini_Socket_NoSPH before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.