2 open source boards using the CP2102-GMR_NRND

Real designs built with the CP2102-GMR_NRND, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The CP2102-GMR_NRND in open source designs

The gallery holds 2 open source boards using the CP2102-GMR_NRND from 2 GitHub repositories; a typical one measures about 75.5 × 44 mm and carries around 53 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is EsperDNS by zachmorr.

Microcontrollers on boards using the CP2102-GMR_NRND

What boards using the CP2102-GMR_NRND are built for

CP2102-GMR_NRND: common questions

Where can I find a CP2102-GMR_NRND reference design?

Each of the 2 boards on this page is a real design using the CP2102-GMR_NRND. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CP2102-GMR_NRND use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the CP2102-GMR_NRND?

The median is 75.5 × 44 mm, and 50% are two-layer designs.

What is the most popular open source board using the CP2102-GMR_NRND?

By GitHub stars, EsperDNS by zachmorr, with 174 stars.

Can I simulate one of these boards using the CP2102-GMR_NRND before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.