6 open source boards using the CS4270

Real designs built with the CS4270, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the CS4270

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CS4270 connects to, and the resistors, capacitors and other passives placed on it.

  • The VQ pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 10 µF).
  • The FIL+ pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 47 µF).
  • The VD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
  • The AINA pin has a capacitor to GND on 4 of 5 designs, most often 220 pF.
VDpin 5Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (5), 1 µF (2)
DGNDpin 6Connected to: GND 100%
SDOUTpin 7Connected to: The microcontroller 40%
  • Series resistor on 40% · 33 Ω (1)
VLCpin 8Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (4), 1 µF (2), 10 µF (1)
SDA/CDOUT/M1pin 9Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 40% · 2.2 kΩ (2)
SCL/CCLK/M0pin 10Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 40% · 2.2 kΩ (2)
AD0/CS/I2S/LJpin 11Connected to: Signal 60% · GND 40%
  • Resistor to GND on 40% · 5.1 kΩ (1), 10 kΩ (1)
AD1/CDIN/MDIV1pin 12Connected to: Signal 60% · GND 40%
  • Resistor to GND on 40% · 5.1 kΩ (1), 10 kΩ (1)
AD2/MDIV2pin 13Connected to: Signal 60% · GND 40%
  • Resistor to GND on 40% · 5.1 kΩ (1), 10 kΩ (1)
RSTpin 14Connected to: The microcontroller 60%
  • Resistor to GND on 40% · 10 kΩ (2)
AINApin 15Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 220 pF (4)
  • Series capacitor on 80% · 10 µF (3)
AINBpin 16Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 80% · 220 pF (3)
  • Series capacitor on 60% · 10 µF (3)
VQpin 17Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (5), 10 µF (4)
FIL+pin 18Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (5), 47 µF (3), 10 µF (1)
VApin 19Connected to: 5V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (5), 47 µF (2), 1 µF (2)
AGNDpin 20Connected to: GND 100%
MUTEApin 21Connected to: Not connected 80% · a signal 20%
OUTApin 22Connected to: Signal 80% · not connected 20%
  • Series capacitor on 80% · 3.3 µF (4)
OUTBpin 23Connected to: Signal 60% · not connected 40%
  • Series capacitor on 60% · 3.3 µF (3)
MUTEBpin 24Connected to: Not connected 80% · a signal 20%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ShieldXL by okyeron, GuitarPedalSTM32 by GuitarML, Canbus controller by adeboni and DSP V0 1 by CoderCallender.

The CS4270 in open source designs

The gallery holds 6 open source boards using the CS4270 from 6 GitHub repositories; a typical one measures about 100 × 95 mm and carries around 135 components.

67% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is ShieldXL by okyeron.

Parts used alongside the CS4270

Microcontrollers on boards using the CS4270

What boards using the CS4270 are built for

CS4270: common questions

Where can I find a CS4270 reference design?

Each of the 6 boards on this page is a real design using the CS4270. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CS4270 VQ pin connected?

The VQ pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the CS4270.

How is the CS4270 FIL+ pin connected?

The FIL+ pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 5 open source designs using the CS4270.

What decoupling capacitors do designs use on the CS4270 VD pin?

The VD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the CS4270.

Which microcontrollers do boards using the CS4270 use?

Most are built on STM32 (3), NXP (1) and Raspberry Pi (1).

How big is a typical board using the CS4270?

The median is 100 × 95 mm, and 67% are two-layer designs.

What is the most popular open source board using the CS4270?

By GitHub stars, ShieldXL by okyeron, with 175 stars.

Can I simulate one of these boards using the CS4270 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part