5 open source boards using the DSLVDS1048PWR
Real designs built with the DSLVDS1048PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Open MOtor DRiver Initiative (OMODRI)
open-dynamic-robot-initiative
50 × 50 mm253 parts8LBSD-3-Clause122RP2040/RP2350
Pixel blit
jvanderberg
197.5 × 122 mm205 parts4LCustom license1Omodri sa v2 laas
open-dynamic-robot-initiative
54.8 × 57.6 mm201 parts8LBSD-3-Clause122Omodri sa laas
open-dynamic-robot-initiative
54.8 × 57.6 mm194 parts8LBSD-3-Clause122Open MOtor DRiver Initiative (OMODRI) - Extension Board
open-dynamic-robot-initiative
50 × 50 mm167 parts6LBSD-3-Clause122
The DSLVDS1048PWR in open source designs
The gallery holds 5 open source boards using the DSLVDS1048PWR from 2 GitHub repositories; a typical one measures about 54.8 × 57.6 mm and carries around 201 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is Open MOtor DRiver Initiative (OMODRI) by open-dynamic-robot-initiative.
Parts used alongside the DSLVDS1048PWR
Microcontrollers on boards using the DSLVDS1048PWR
What boards using the DSLVDS1048PWR are built for
DSLVDS1048PWR: common questions
Where can I find a DSLVDS1048PWR reference design?
Each of the 5 boards on this page is a real design using the DSLVDS1048PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DSLVDS1048PWR use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the DSLVDS1048PWR?
The median is 54.8 × 57.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the DSLVDS1048PWR?
By GitHub stars, Open MOtor DRiver Initiative (OMODRI) by open-dynamic-robot-initiative, with 122 stars.
Can I simulate one of these boards using the DSLVDS1048PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.