3 open source boards using the DW1000
Real designs built with the DW1000, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Socitrack
lab11
31.8 × 27.5 mm57 parts4LApache-2.022DW1000
saima-firdaus
24.5 × 25.8 mm58 parts4LNo license0STM32
Protopoint
lab11
31.8 × 27.5 mm57 parts4LApache-2.0144
The DW1000 in open source designs
The gallery holds 3 open source boards using the DW1000 from 3 GitHub repositories; a typical one measures about 31.8 × 27.5 mm and carries around 57 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Protopoint by lab11.
Parts used alongside the DW1000
Microcontrollers on boards using the DW1000
What boards using the DW1000 are built for
DW1000: common questions
Where can I find a DW1000 reference design?
Each of the 3 boards on this page is a real design using the DW1000. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DW1000?
The AO6604, LXDC2HL, ProtoPoint_Module, SKY13317 and STM32F031G6U6 appear in the most repositories here.
Which microcontrollers do boards using the DW1000 use?
Most are built on STM32 (2).
How big is a typical board using the DW1000?
The median is 31.8 × 27.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the DW1000?
By GitHub stars, Protopoint by lab11, with 144 stars.
Can I simulate one of these boards using the DW1000 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.