34 open source boards using the SKY13317

Real designs built with the SKY13317, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

34 boardsClear filters|Most starred

How designs wire the SKY13317

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the SKY13317 connects to, and the resistors, capacitors and other passives placed on it.

  • The RFC pin has a series capacitor on 12 of 14 designs, most often 100 nF.
  • The V1 pin has a capacitor to GND on 12 of 14 designs, most often 33 pF.
  • The RF1 pin has a series capacitor on 12 of 14 designs, most often 22 pF.
  • The RF2 pin has a series capacitor on 12 of 14 designs, most often 100 nF.
GNDpin 0Connected to: GND 100%
RFCpin 1Connected to: Signal 100%
  • Series capacitor on 86% · 100 nF (11)
NCpin 2Connected to: Not connected 100%
V1pin 3Connected to: A connector 86%, LPC43XXFBD144 50%, the microcontroller 43%
  • Capacitor to GND on 86% · 33 pF (11)
RF1pin 4Connected to: Signal 100%
  • Series capacitor on 86% · 22 pF (11)
RF2pin 5Connected to: Signal 100%
  • Series capacitor on 86% · 100 nF (11)
V2pin 6Connected to: A connector 86%, SKY13350 79%, LPC43XXFBD144 50%
  • Capacitor to GND on 86% · 33 pF (32)
V3pin 7Connected to: A connector 86%, LPC43XXFBD144 50%, the microcontroller 43%
  • Capacitor to GND on 86% · 33 pF (11)
RF3pin 8Connected to: Signal 100%
  • Series capacitor on 86% · 22 pF (11)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf one by Charmve, Protopoint by lab11, Socitrack by lab11 and Rf switch sp3t by greatscottgadgets.

The SKY13317 in open source designs

The gallery holds 34 open source boards using the SKY13317 from 14 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 353 components.

100% use four copper layers or more, and 85% carry an open source license.

The most starred is Hackrf one by Charmve.

Microcontrollers on boards using the SKY13317

What boards using the SKY13317 are built for

SKY13317: common questions

Where can I find a SKY13317 reference design?

Each of the 34 boards on this page is a real design using the SKY13317. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SKY13317 RFC pin connected?

The RFC pin has a series capacitor on 12 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the SKY13317.

How is the SKY13317 V1 pin connected?

The V1 pin has a capacitor to GND on 12 of 14 designs, most often 33 pF. Counted from the KiCad layouts of 14 open source designs using the SKY13317.

How is the SKY13317 RF1 pin connected?

The RF1 pin has a series capacitor on 12 of 14 designs, most often 22 pF. Counted from the KiCad layouts of 14 open source designs using the SKY13317.

What parts are used alongside the SKY13317?

The MAX2837, MAX5864, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.

Which microcontrollers do boards using the SKY13317 use?

Most are built on NXP (16), STM32 (2) and FPGA (1).

How big is a typical board using the SKY13317?

The median is 120 × 75 mm, and 0% are two-layer designs.

What is the most popular open source board using the SKY13317?

By GitHub stars, Hackrf one by Charmve, with 354 stars.

Can I simulate one of these boards using the SKY13317 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part