5 open source boards using the STM32F031G6U6

Real designs built with the STM32F031G6U6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The STM32F031G6U6 in open source designs

The gallery holds 5 open source boards using the STM32F031G6U6 from 3 GitHub repositories; a typical one measures about 45 × 45 mm and carries around 57 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Protopoint by lab11.

Parts used alongside the STM32F031G6U6

Microcontrollers on boards using the STM32F031G6U6

What boards using the STM32F031G6U6 are built for

STM32F031G6U6: common questions

Where can I find a STM32F031G6U6 reference design?

Each of the 5 boards on this page is a real design using the STM32F031G6U6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32F031G6U6?

The AO6604, DW1000, LXDC2HL, ProtoPoint_Module and SKY13317 appear in the most repositories here.

Which microcontrollers do boards using the STM32F031G6U6 use?

Most are built on STM32 (5).

How big is a typical board using the STM32F031G6U6?

The median is 45 × 45 mm, and 40% are two-layer designs.

What is the most popular open source board using the STM32F031G6U6?

By GitHub stars, Protopoint by lab11, with 144 stars.

Can I simulate one of these boards using the STM32F031G6U6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part