2 open source boards using the LXDC2HL

Real designs built with the LXDC2HL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LXDC2HL in open source designs

The gallery holds 2 open source boards using the LXDC2HL from 2 GitHub repositories; a typical one measures about 31.8 × 27.5 mm and carries around 57 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Protopoint by lab11.

Microcontrollers on boards using the LXDC2HL

What boards using the LXDC2HL are built for

LXDC2HL: common questions

Where can I find a LXDC2HL reference design?

Each of the 2 boards on this page is a real design using the LXDC2HL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LXDC2HL?

The AO6604, DW1000, ProtoPoint_Module, SKY13317 and STM32F031G6U6 appear in the most repositories here.

Which microcontrollers do boards using the LXDC2HL use?

Most are built on STM32 (2).

How big is a typical board using the LXDC2HL?

The median is 31.8 × 27.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the LXDC2HL?

By GitHub stars, Protopoint by lab11, with 144 stars.

Can I simulate one of these boards using the LXDC2HL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part