2 open source boards using the ENCODER_CONNECT_IC
Real designs built with the ENCODER_CONNECT_IC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Zirconia
viola0222
39 × 91 mm90 parts2LApache-2.03
STM32STM32G474CET 260226
takushio2525
39 × 91 mm90 parts2LNo license0
The ENCODER_CONNECT_IC in open source designs
The gallery holds 2 open source boards using the ENCODER_CONNECT_IC from 2 GitHub repositories; a typical one measures about 39 × 91 mm and carries around 90 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Zirconia by viola0222.
Parts used alongside the ENCODER_CONNECT_IC
Microcontrollers on boards using the ENCODER_CONNECT_IC
ENCODER_CONNECT_IC: common questions
Where can I find a ENCODER_CONNECT_IC reference design?
Each of the 2 boards on this page is a real design using the ENCODER_CONNECT_IC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ENCODER_CONNECT_IC?
The DRV8836DSSR, ENCODER_CONNECT_PCB, ICM-42688-P, LP5907MFX-3.0/NOPB and MA730GQ-Z appear in the most repositories here.
Which microcontrollers do boards using the ENCODER_CONNECT_IC use?
Most are built on STM32 (2).
How big is a typical board using the ENCODER_CONNECT_IC?
The median is 39 × 91 mm, and 100% are two-layer designs.
What is the most popular open source board using the ENCODER_CONNECT_IC?
By GitHub stars, Zirconia by viola0222, with 3 stars.
Can I simulate one of these boards using the ENCODER_CONNECT_IC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.