6 open source boards using the ESP32-WROOM-32D-N4

Real designs built with the ESP32-WROOM-32D-N4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ESP32-WROOM-32D-N4

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-WROOM-32D-N4 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ.
  • The SENSOR_VP pin is left unconnected on 6 of 6 designs.
  • The SENSOR_VN pin is left unconnected on 6 of 6 designs.
  • The SHD/SD2 pin is left unconnected on 6 of 6 designs.
GNDpin 1, 15, 38, 39Connected to: GND 98%
3V3pin 2Connected to: 3.3V 83% · a signal 17%
ENpin 3Connected to: Signal 100%
  • Pull-up to 3.3V on 83% · 10 kΩ (5)
  • Capacitor to GND on 67% · 100 nF (2), 1 µF (1), 10 µF (1)
SENSOR_VPpin 4Connected to: Not connected 100%
SENSOR_VNpin 5Connected to: Not connected 100%
IO34pin 6Connected to: Not connected 67% · a signal 33%
IO35pin 7Connected to: Not connected 67% · a signal 33%
IO14pin 13Connected to: Not connected 67% · a signal 33%
  • Series resistor on 33% · 1 kΩ (2)
IO12pin 14Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 1 kΩ (2)
IO13pin 16Connected to: Signal 67% · not connected 33%
  • Series resistor on 50% · 1 kΩ (3)
SHD/SD2pin 17Connected to: Not connected 100%
SWP/SD3pin 18Connected to: Not connected 100%
SCS/CMDpin 19Connected to: Not connected 100%
SCK/CLKpin 20Connected to: Not connected 100%
SDO/SD0pin 21Connected to: Not connected 100%
SDI/SD1pin 22Connected to: Not connected 100%
IO15pin 23Connected to: Signal 67% · not connected 33%
  • Series resistor on 50% · 1 kΩ (3)
IO0pin 25Connected to: Signal 100%
  • Pull-up to 3.3V on 50% · 10 kΩ (3)
IO16pin 27Connected to: Not connected 83% · a signal 17%
IO5pin 29Connected to: Not connected 83% · a signal 17%
IO19pin 31Connected to: Signal 67% · not connected 33%
  • Pull-up to VBAT on 33% · 300 kΩ (1), 4.7 kΩ (1)
NCpin 32Connected to: Not connected 100%
IO21pin 33Connected to: Signal 83% · not connected 17%
  • Pull-up to 3.3V on 67% · 10 kΩ (2), 5.1 kΩ (1), 2.1 kΩ (1)
RXD0pin 34Connected to: Signal 100%
  • Series resistor on 33% · 22 Ω (1), 10 kΩ (1)
IO22pin 36Connected to: A connector 50%
  • Pull-up to 3.3V on 67% · 10 kΩ (1), 4.7 kΩ (1), 5.1 kΩ (1)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hand main by SonDinh23, ESP32-IoT-Monitoring-Control-Board by Habib-creater, Node-Smart-Clock by martinsram3k and Lilygo by Ndambia.

The ESP32-WROOM-32D-N4 in open source designs

The gallery holds 6 open source boards using the ESP32-WROOM-32D-N4 from 6 GitHub repositories; a typical one measures about 84.9 × 49.5 mm and carries around 65 components.

50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Hand main by SonDinh23.

Parts used alongside the ESP32-WROOM-32D-N4

Microcontrollers on boards using the ESP32-WROOM-32D-N4

ESP32-WROOM-32D-N4: common questions

Where can I find a ESP32-WROOM-32D-N4 reference design?

Each of the 6 boards on this page is a real design using the ESP32-WROOM-32D-N4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-WROOM-32D-N4 EN pin?

The EN pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the ESP32-WROOM-32D-N4.

How is the ESP32-WROOM-32D-N4 SENSOR_VP pin connected?

The SENSOR_VP pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-WROOM-32D-N4.

How is the ESP32-WROOM-32D-N4 SENSOR_VN pin connected?

The SENSOR_VN pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-WROOM-32D-N4.

Which microcontrollers do boards using the ESP32-WROOM-32D-N4 use?

Most are built on ESP32 (6).

How big is a typical board using the ESP32-WROOM-32D-N4?

The median is 84.9 × 49.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM-32D-N4?

By GitHub stars, Hand main by SonDinh23, with 4 stars.

Can I simulate one of these boards using the ESP32-WROOM-32D-N4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part