7 open source boards using the F1C200S
Real designs built with the F1C200S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Core
Zhang-JK
30 × 51 mm96 parts4LNo license2My first linux board
clarkmcc
44 × 44 mm89 parts4LNo license0Nabby linux
JoachimBose
80 × 80.5 mm60 parts2LGPL-2.00Minix box
frogshead
50 × 20 mm14 parts2LNo license0F1C200S WS RGB T7
xfdr0805
50.8 × 22.9 mm134 parts2LNo license0Fragaria core
Zhang-JK
22 × 42 mm64 parts4LNo license2ESP32
Radianite-MicroNeo2
RadianiteComputers
50 × 33 mm70 parts4LNo license0
How designs wire the F1C200S
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the F1C200S connects to, and the resistors, capacitors and other passives placed on it.
- The HPVCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VCC-IO pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VDD-CORE pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VCC-DRAM pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| HPLpin 1 | Connected to: Not connected 60% · a signal 40% | — |
| HPCOMFBpin 2 | Connected to: Not connected 80% · a signal 20% | — |
| HPCOMpin 3 | Connected to: Not connected 80% · a signal 20% | — |
| HPVCCpin 4 | Connected to: 3.3V 100% |
|
| VCC-IOpin 5, 20, 50 | Connected to: 3.3V 100% |
|
| PD2pin 8 | Connected to: Not connected 60% · a signal 40% | — |
| PD9pin 15 | Connected to: Not connected 60% · a signal 40% | — |
| PD10pin 16 | Connected to: Not connected 60% · a signal 40% | — |
| PD11pin 17 | Connected to: Not connected 60% · a signal 40% | — |
| PD12pin 18 | Connected to: Not connected 60% · a signal 40% | — |
| PD13pin 19 | Connected to: Not connected 60% · a signal 40% | — |
| PD14pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| VDD-COREpin 22, 35, 71 | Connected to: 1.1V 80% · a signal 20% |
|
| PD15pin 23 | Connected to: Not connected 60% · a signal 40% | — |
| PD16pin 24 | Connected to: Not connected 60% · a signal 40% | — |
| PD17pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| PD18pin 26 | Connected to: Not connected 60% · a signal 40% | — |
| PD19pin 27 | Connected to: Not connected 60% · a signal 40% | — |
| PD20pin 28 | Connected to: Not connected 60% · a signal 40% | — |
| PD21pin 29 | Connected to: Not connected 60% · a signal 40% | — |
| VCC-DRAMpin 30, 31, 32, 34, 36 | Connected to: 2.5V 80% · a signal 20% |
|
| SVREFpin 33 | Connected to: Signal 100% |
|
| PE12pin 37 | Connected to: Not connected 80% · a signal 20% | — |
| PE11pin 38 | Connected to: Not connected 80% · a signal 20% | — |
| PE10pin 39 | Connected to: Not connected 80% · a signal 20% | — |
| PE9pin 40 | Connected to: Not connected 80% · a signal 20% | — |
| PE8pin 41 | Connected to: Not connected 80% · a signal 20% | — |
| PE7pin 42 | Connected to: Not connected 80% · a signal 20% | — |
| PE6pin 43 | Connected to: Not connected 60% · a signal 40% | — |
| PE5pin 44 | Connected to: Not connected 100% | — |
| PE4pin 45 | Connected to: Not connected 80% · a signal 20% | — |
| PE3pin 46 | Connected to: Not connected 100% | — |
| PE2pin 47 | Connected to: Not connected 100% | — |
| PE1pin 48 | Connected to: CH340E 40%, a connector 40% |
|
| PE0pin 49 | Connected to: CH340E 40%, a connector 40% |
|
| HOSCIpin 51 | Connected to: Signal 100% |
|
| HOSCOpin 52 | Connected to: Signal 100% |
|
| PF5pin 53 | Connected to: A connector 60% · not connected 20% |
|
| PF4pin 54 | Connected to: A connector 60% · not connected 20% |
|
| PF3pin 55 | Connected to: A connector 60% · not connected 20% |
|
41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Core by Zhang-JK, My first linux board by clarkmcc, Nabby linux by JoachimBose and Radianite-MicroNeo2 by RadianiteComputers.
The F1C200S in open source designs
The gallery holds 7 open source boards using the F1C200S from 6 GitHub repositories; a typical one measures about 50 × 42 mm and carries around 70 components.
57% use four copper layers or more, and 14% carry an open source license.
The most starred is Core by Zhang-JK.
Parts used alongside the F1C200S
Microcontrollers on boards using the F1C200S
What boards using the F1C200S are built for
F1C200S: common questions
Where can I find a F1C200S reference design?
Each of the 7 boards on this page is a real design using the F1C200S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the F1C200S HPVCC pin?
The HPVCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the F1C200S.
What decoupling capacitors do designs use on the F1C200S VCC-IO pin?
The VCC-IO pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the F1C200S.
What decoupling capacitors do designs use on the F1C200S VDD-CORE pin?
The VDD-CORE pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the F1C200S.
Which microcontrollers do boards using the F1C200S use?
Most are built on ESP32 (1).
How big is a typical board using the F1C200S?
The median is 50 × 42 mm, and 43% are two-layer designs.
What is the most popular open source board using the F1C200S?
By GitHub stars, Core by Zhang-JK, with 2 stars.
Can I simulate one of these boards using the F1C200S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.