8 open source boards using the FT232HL
Real designs built with the FT232HL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sdmux4
hnz1102
68.3 × 57.7 mm115 parts2LMIT16Ft232hbrkout
hnz1102
50 × 30 mm52 parts2LNo license5UsbI2cSpiAdapter
hnz1102
55 × 30 mm40 parts2LNo license5Ft2232 jtag tap
tnishinaga
50 × 30 mm36 parts2LNo license3Sdcdmuxemmc
hnz1102
68.3 × 57.8 mm107 parts2LMIT16UBITz-Host z80-Host
dumaiss
84.3 × 108.4 mm48 parts4LSHL-2.10STM32
Quasar Debugger
petrinm
56.2 × 49 mm118 parts6LCERN-OHL-W-2.06USB-JTAG-Programmer
dumaiss
31 × 35 mm24 parts4LSHL-2.10
How designs wire the FT232HL
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the FT232HL connects to, and the resistors, capacitors and other passives placed on it.
- The XCSI pin has a crystal on 6 of 6 designs, most often 12 MHz.
- The VPHY pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 4.7 µF).
- The REF pin has a resistor to GND on 6 of 6 designs, most often 12 kΩ.
- The VPLL pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| XCSIpin 1 | Connected to: Signal 100% |
|
| XCSOpin 2 | Connected to: Signal 83% · not connected 17% |
|
| VPHYpin 3 | Connected to: Signal 100% |
|
| AGNDpin 4, 9, 41 | Connected to: GND 100% | — |
| REFpin 5 | Connected to: Signal 100% |
|
| DMpin 6 | Connected to: A connector 67% |
|
| DPpin 7 | Connected to: A connector 67% |
|
| VPLLpin 8 | Connected to: Signal 100% |
|
| GNDpin 10, 11, 22, 23, 35, 36, 47, 48 | Connected to: GND 100% | — |
| VCCIOpin 12, 24, 46 | Connected to: 3.3V 83% · a signal 17% |
|
| ADBUS4pin 17 | Connected to: Not connected 67% · a signal 33% | — |
| ADBUS5pin 18 | Connected to: Not connected 67% · a signal 33% | — |
| ADBUS6pin 19 | Connected to: Not connected 83% · a signal 17% | — |
| ADBUS7pin 20 | Connected to: Not connected 67% · a signal 33% | — |
| ACBUS0pin 21 | Connected to: Not connected 67% · a signal 33% | — |
| ACBUS1pin 25 | Connected to: Not connected 67% · a signal 33% | — |
| ACBUS2pin 26 | Connected to: Not connected 67% · a signal 33% | — |
| ACBUS3pin 27 | Connected to: Not connected 83% · a signal 17% | — |
| ACBUS4pin 28 | Connected to: Not connected 83% · a signal 17% | — |
| ACBUS5pin 29 | Connected to: Not connected 67% · a signal 33% | — |
| ACBUS6pin 30 | Connected to: Not connected 83% · a signal 17% | — |
| ACBUS7pin 31 | Connected to: Not connected 83% · a signal 17% | — |
| ACBUS8pin 32 | Connected to: Not connected 83% · a signal 17% | — |
| ACBUS9pin 33 | Connected to: Not connected 83% · a signal 17% | — |
| RESETpin 34 | Connected to: Signal 100% |
|
| VCCApin 37 | Connected to: Signal 83% · VCCA 17% |
|
| VCCCOREpin 38 | Connected to: Signal 83% · 1.8V 17% |
|
| VCCDpin 39 | Connected to: 3.3V 83% · a signal 17% |
|
| VREGINpin 40 | Connected to: 5V 100% |
|
| TESTpin 42 | Connected to: GND 100% | — |
| EEDATApin 43 | Connected to: 93LCXXBXXOT 33%, 93LC56BT-I/OT 33% |
|
| EECLKpin 44 | Connected to: 93LCXXBXXOT 33%, 93LC56BT-I/OT 33% |
|
| EECSpin 45 | Connected to: 93LCXXBXXOT 33%, 93LC56BT-I/OT 33% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sdcdmuxemmc by hnz1102, Quasar Debugger by petrinm, Ft232hbrkout by hnz1102 and UsbI2cSpiAdapter by hnz1102.
The FT232HL in open source designs
The gallery holds 8 open source boards using the FT232HL from 6 GitHub repositories; a typical one measures about 55.6 × 42 mm and carries around 50 components.
63% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Sdmux4 by hnz1102.
Parts used alongside the FT232HL
Microcontrollers on boards using the FT232HL
What boards using the FT232HL are built for
FT232HL: common questions
Where can I find a FT232HL reference design?
Each of the 8 boards on this page is a real design using the FT232HL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FT232HL XCSI pin connected?
The XCSI pin has a crystal on 6 of 6 designs, most often 12 MHz. Counted from the KiCad layouts of 6 open source designs using the FT232HL.
How is the FT232HL VPHY pin connected?
The VPHY pin has a capacitor to GND on 6 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the FT232HL.
What resistor goes on the FT232HL REF pin?
The REF pin has a resistor to GND on 6 of 6 designs, most often 12 kΩ. Counted from the KiCad layouts of 6 open source designs using the FT232HL.
What parts are used alongside the FT232HL?
The 93LC56BT-I/OT, 93LCxxBxxOT and SPX3819M5-L appear in the most repositories here.
Which microcontrollers do boards using the FT232HL use?
Most are built on STM32 (1).
How big is a typical board using the FT232HL?
The median is 55.6 × 42 mm, and 63% are two-layer designs.
What is the most popular open source board using the FT232HL?
By GitHub stars, Sdmux4 by hnz1102, with 16 stars.
Can I simulate one of these boards using the FT232HL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.