7 open source boards using the INA181A1

Real designs built with the INA181A1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the INA181A1

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the INA181A1 connects to, and the resistors, capacitors and other passives placed on it.

  • The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
  • The + pin has a series resistor on 3 of 6 designs, most often 1 kΩ (then 75 Ω).
  • The - pin has a series resistor on 3 of 6 designs, most often 5 mΩ (then 100 Ω).
GNDpin 2Connected to: GND 83% · a signal 17%
+pin 3Connected to: Signal 67% · 18V 33%
  • Series resistor on 50% · 1 kΩ (2), 75 Ω (1), 5 mΩ (1)
-pin 4Connected to: Signal 67% · GND 17% · 18V 17%
  • Series resistor on 50% · 5 mΩ (1), 100 Ω (1), 25 mΩ (1)
REFpin 5Connected to: GND 50% · a signal 50%
  • Capacitor to GND on 33% · 100 nF (3), 1 µF (1)
V+pin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (4), 10 µF (2), 2.2 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Afterglow by bitfieldlabs, Soldering station by microbug, Power board by tudsat-rocket and RTB C12 by git4dcc.

The INA181A1 in open source designs

The gallery holds 7 open source boards using the INA181A1 from 7 GitHub repositories; a typical one measures about 84.1 × 65.8 mm and carries around 93 components.

67% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Afterglow by bitfieldlabs.

Parts used alongside the INA181A1

Microcontrollers on boards using the INA181A1

What boards using the INA181A1 are built for

INA181A1: common questions

Where can I find a INA181A1 reference design?

Each of the 7 boards on this page is a real design using the INA181A1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the INA181A1 V+ pin?

The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the INA181A1.

What resistor goes on the INA181A1 + pin?

The + pin has a series resistor on 3 of 6 designs, most often 1 kΩ (then 75 Ω). Counted from the KiCad layouts of 6 open source designs using the INA181A1.

What resistor goes on the INA181A1 - pin?

The - pin has a series resistor on 3 of 6 designs, most often 5 mΩ (then 100 Ω). Counted from the KiCad layouts of 6 open source designs using the INA181A1.

Which microcontrollers do boards using the INA181A1 use?

Most are built on AVR/Arduino (2), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the INA181A1?

The median is 84.1 × 65.8 mm, and 67% are two-layer designs.

What is the most popular open source board using the INA181A1?

By GitHub stars, Afterglow by bitfieldlabs, with 32 stars.

Can I simulate one of these boards using the INA181A1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part