2 open source boards using the INA186A1

Real designs built with the INA186A1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The INA186A1 in open source designs

The gallery holds 2 open source boards using the INA186A1 from 2 GitHub repositories; a typical one measures about 120 × 100 mm and carries around 297 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Core by Hive-RSI-Lab.

Microcontrollers on boards using the INA186A1

What boards using the INA186A1 are built for

INA186A1: common questions

Where can I find a INA186A1 reference design?

Each of the 2 boards on this page is a real design using the INA186A1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the INA186A1?

The CH224Q, CH340B, ES7243E, ES9018K2M and ESP32-WROVER-E-N8R8 appear in the most repositories here.

Which microcontrollers do boards using the INA186A1 use?

Most are built on ESP32 (2).

How big is a typical board using the INA186A1?

The median is 120 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the INA186A1?

By GitHub stars, Core by Hive-RSI-Lab, with 1 stars.

Can I simulate one of these boards using the INA186A1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part