7 open source boards using the INA821ID
Real designs built with the INA821ID, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
SDRReciever
KonradMcClure
100 × 100 mm78 parts2LNo license7AVR/Arduino
Corrected ENGR357 Project v1.1
pricna
100 × 100 mm80 parts2LMPL-2.03Shim amplifier, control
stockmann-lab
343.3 × 120 mm1003 parts4LNo license2RP2040/RP2350
CPTR480-ENGR357 Quadrature SDR
Jeffrey-McCormick
100 × 100 mm244 parts4LMIT2AVR/Arduino
SDRBackup2
KonradMcClure
100 × 100 mm76 parts2LNo license7AVR/Arduino
ENGR357 Project v1.1
pricna
74 × 72.1 mm66 parts2LMPL-2.03AVR/Arduino
SDRBackup
KonradMcClure
100 × 100 mm69 parts2LNo license7
The INA821ID in open source designs
The gallery holds 7 open source boards using the INA821ID from 4 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 78 components.
71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is SDRReciever by KonradMcClure.
Parts used alongside the INA821ID
Microcontrollers on boards using the INA821ID
What boards using the INA821ID are built for
INA821ID: common questions
Where can I find a INA821ID reference design?
Each of the 7 boards on this page is a real design using the INA821ID. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the INA821ID?
The Si5351A-B-GT, Arduino_Nano_v3.x and SN74CBT3253 appear in the most repositories here.
Which microcontrollers do boards using the INA821ID use?
Most are built on AVR/Arduino (5) and RP2040/RP2350 (1).
How big is a typical board using the INA821ID?
The median is 100 × 100 mm, and 71% are two-layer designs.
What is the most popular open source board using the INA821ID?
By GitHub stars, SDRReciever by KonradMcClure, with 7 stars.
Can I simulate one of these boards using the INA821ID before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.