7 open source boards using the LAN8720A-CP-TR

Real designs built with the LAN8720A-CP-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LAN8720A-CP-TR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LAN8720A-CP-TR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD2A pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The XTAL2 pin has a crystal on 6 of 7 designs, most often 25 MHz.
  • The XTAL2 pin has a capacitor to GND on 6 of 7 designs, most often 220 nF (then 22 pF).
  • The XTAL1/CLKIN pin has a crystal on 6 of 7 designs, most often 25 MHz.
VDD2Apin 1Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 86% · 100 nF (9), 1 µF (5), 10 µF (1)
LED2/NINTSELpin 2Connected to: Signal 100%
  • Resistor to GND on 43% · 10 kΩ (3)
XTAL2pin 4Connected to: Signal 86%
  • Crystal on 86% · 25 MHz (2)
  • Capacitor to GND on 86% · 220 nF (2), 22 pF (1), 18 pF (1)
XTAL1/CLKINpin 5Connected to: Signal 100%
  • Crystal on 86% · 25 MHz (2)
  • Capacitor to GND on 86% · 220 nF (2), 22 pF (1), 18 pF (1)
VDDCRpin 6Connected to: VDDCR 57% · a signal 43%
  • Decoupling capacitor on 71% · 1 µF (4), 470 pF (3), 100 nF (1)
RXD1/MODE1pin 7Connected to: The microcontroller 57%
  • Series resistor on 43% · 33 Ω (2), 22 Ω (1)
RXD0/MODE0pin 8Connected to: The microcontroller 57%
  • Series resistor on 43% · 33 Ω (2), 22 Ω (1)
VDDIOpin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 57% · 100 nF (5)
CRS_DV/MODE2pin 11Connected to: The microcontroller 57%
  • Series resistor on 43% · 33 Ω (2), 22 Ω (1)
MDIOpin 12Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 57% · 1.5 kΩ (4)
NINT/REFCLKOpin 14Connected to: Signal 86%
  • Series resistor on 71% · 33 Ω (3), 22 Ω (2)
NRSTpin 15Connected to: The microcontroller 71%
  • Pull-up to 3.3V on 86% · 10 kΩ (6)
VDD1Apin 19Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 86% · 100 nF (7), 1 µF (5), 10 µF (1)
TXNpin 20Connected to: A connector 43%
  • Series resistor on 57% · 49.9 Ω (3), 0 Ω (1)
  • Pull-up to 3.3V on 43% · 49.9 Ω (2)
TXPpin 21Connected to: A connector 43%
  • Series resistor on 57% · 49.9 Ω (3), 0 Ω (1)
  • Pull-up to 3.3V on 43% · 49.9 Ω (2)
RXNpin 22Connected to: A connector 43%
  • Series resistor on 57% · 49.9 Ω (3), 0 Ω (1)
  • Pull-up to 3.3V on 43% · 49.9 Ω (2)
RXPpin 23Connected to: A connector 43%
  • Series resistor on 57% · 49.9 Ω (3), 0 Ω (1)
  • Pull-up to 3.3V on 43% · 49.9 Ω (2)
RBIASpin 24Connected to: Signal 100%
  • Resistor to GND on 86% · 12.1 kΩ (5), 10 kΩ (1)
EPpin 25Connected to: GND 86%

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nif-T by SharKingStudios, ArtNetNode Lite by vili111111p, Esp32-p4 by Andreuxxx1977 and Garage controller by Bespoke-Technology-Group.

The LAN8720A-CP-TR in open source designs

The gallery holds 7 open source boards using the LAN8720A-CP-TR from 7 GitHub repositories; a typical one measures about 100 × 99.8 mm and carries around 103 components.

86% use four copper layers or more, and 57% carry an open source license.

The most starred is Nif-T by SharKingStudios.

Microcontrollers on boards using the LAN8720A-CP-TR

What boards using the LAN8720A-CP-TR are built for

LAN8720A-CP-TR: common questions

Where can I find a LAN8720A-CP-TR reference design?

Each of the 7 boards on this page is a real design using the LAN8720A-CP-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LAN8720A-CP-TR VDD2A pin?

The VDD2A pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LAN8720A-CP-TR.

How is the LAN8720A-CP-TR XTAL2 pin connected?

The XTAL2 pin has a crystal on 6 of 7 designs, most often 25 MHz. Counted from the KiCad layouts of 7 open source designs using the LAN8720A-CP-TR.

How is the LAN8720A-CP-TR XTAL1/CLKIN pin connected?

The XTAL1/CLKIN pin has a crystal on 6 of 7 designs, most often 25 MHz. Counted from the KiCad layouts of 7 open source designs using the LAN8720A-CP-TR.

What parts are used alongside the LAN8720A-CP-TR?

The AMS1117-3.3, CH340C, CP2102N-A02-GQFN24R, DP1435-5V and LM66100DCKR appear in the most repositories here.

Which microcontrollers do boards using the LAN8720A-CP-TR use?

Most are built on ESP32 (4), FPGA (1), PIC (1) and STM32 (1).

How big is a typical board using the LAN8720A-CP-TR?

The median is 100 × 99.8 mm, and 14% are two-layer designs.

What is the most popular open source board using the LAN8720A-CP-TR?

By GitHub stars, Nif-T by SharKingStudios, with 11 stars.

Can I simulate one of these boards using the LAN8720A-CP-TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part