4 open source boards using the LD1117S12CTR
Real designs built with the LD1117S12CTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Ultimate temperature controller
Technariumas
80 × 100 mm68 parts2LApache-2.04FPGA
MachXO2-KiCad-Board
jay-waghmare
65 × 48 mm52 parts4LMIT1FPGA
FPL
jacobjuneau6
100 × 100 mm134 parts2LMIT0FPGA
FPL marked
jacobjuneau6
100 × 99.8 mm60 parts4LMIT0
The LD1117S12CTR in open source designs
The gallery holds 4 open source boards using the LD1117S12CTR from 3 GitHub repositories; a typical one measures about 90 × 99.9 mm and carries around 64 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Ultimate temperature controller by Technariumas.
Microcontrollers on boards using the LD1117S12CTR
What boards using the LD1117S12CTR are built for
LD1117S12CTR: common questions
Where can I find a LD1117S12CTR reference design?
Each of the 4 boards on this page is a real design using the LD1117S12CTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LD1117S12CTR use?
Most are built on FPGA (3) and AVR/Arduino (1).
How big is a typical board using the LD1117S12CTR?
The median is 90 × 99.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the LD1117S12CTR?
By GitHub stars, Ultimate temperature controller by Technariumas, with 4 stars.
Can I simulate one of these boards using the LD1117S12CTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.