5 open source boards using the LM1084-ADJ

Real designs built with the LM1084-ADJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The LM1084-ADJ in open source designs

The gallery holds 5 open source boards using the LM1084-ADJ from 4 GitHub repositories; a typical one measures about 154.4 × 80.3 mm and carries around 74 components.

80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Vfd display by eshazen.

Microcontrollers on boards using the LM1084-ADJ

LM1084-ADJ: common questions

Where can I find a LM1084-ADJ reference design?

Each of the 5 boards on this page is a real design using the LM1084-ADJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM1084-ADJ use?

Most are built on AVR/Arduino (2) and Raspberry Pi (1).

How big is a typical board using the LM1084-ADJ?

The median is 154.4 × 80.3 mm, and 80% are two-layer designs.

What is the most popular open source board using the LM1084-ADJ?

By GitHub stars, Vfd display by eshazen, with 33 stars.

Can I simulate one of these boards using the LM1084-ADJ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part