9 open source boards using the NCP114ASN330T1G

Real designs built with the NCP114ASN330T1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the NCP114ASN330T1G

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the NCP114ASN330T1G connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT_5 pin has a capacitor to GND on 8 of 8 designs, most often 1 µF (then 100 nF).
  • The IN pin has a capacitor to GND on 6 of 8 designs, most often 1 µF (then 2.2 µF).
  • The EN pin has a capacitor to GND on 6 of 8 designs, most often 1 µF (then 2.2 µF).
INpin 1Connected to: 5V 50% · a signal 50%
  • Capacitor to GND on 75% · 1 µF (4), 2.2 µF (2), 47 µF (1)
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: Signal 75% · 5V 25%
  • Capacitor to GND on 75% · 1 µF (4), 2.2 µF (2), 47 µF (1)
NCpin 4Connected to: Not connected 88%
VOUT_5pin 5Connected to: 3.3V 50% · a signal 50%
  • Capacitor to GND on 100% · 1 µF (5), 100 nF (3), 10 µF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Femto tester v1 by mfolejewski, Solderbit gamepad by devices-lab, Garden133 by chl33 and Pcb by girishji.

The NCP114ASN330T1G in open source designs

The gallery holds 9 open source boards using the NCP114ASN330T1G from 8 GitHub repositories; a typical one measures about 80 × 49.3 mm and carries around 78 components.

67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Femto tester v1 by mfolejewski.

Microcontrollers on boards using the NCP114ASN330T1G

What boards using the NCP114ASN330T1G are built for

NCP114ASN330T1G: common questions

Where can I find a NCP114ASN330T1G reference design?

Each of the 9 boards on this page is a real design using the NCP114ASN330T1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NCP114ASN330T1G VOUT_5 pin connected?

The VOUT_5 pin has a capacitor to GND on 8 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the NCP114ASN330T1G.

How is the NCP114ASN330T1G IN pin connected?

The IN pin has a capacitor to GND on 6 of 8 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the NCP114ASN330T1G.

How is the NCP114ASN330T1G EN pin connected?

The EN pin has a capacitor to GND on 6 of 8 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the NCP114ASN330T1G.

What parts are used alongside the NCP114ASN330T1G?

The 74HC165D,653, ADR4520ARZ-R7, ESP32-S3-MINI-1U-N8, LM27762DSSR and LT3045EDD-1#TRPBF appear in the most repositories here.

Which microcontrollers do boards using the NCP114ASN330T1G use?

Most are built on ESP32 (3) and RP2040/RP2350 (2).

How big is a typical board using the NCP114ASN330T1G?

The median is 80 × 49.3 mm, and 67% are two-layer designs.

What is the most popular open source board using the NCP114ASN330T1G?

By GitHub stars, Femto tester v1 by mfolejewski, with 158 stars.

Can I simulate one of these boards using the NCP114ASN330T1G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part