10 open source boards using the LM3940
Real designs built with the LM3940, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ISA FPGA v2
robfinch
223.3 × 120.1 mm104 parts4LNo license78AVR/Arduino
AT65C02 Hobby Computer
Kayto
241.3 × 149.9 mm161 parts2LCERN-OHL-1.27STM32
NEOM 0
wal99d
27 × 50.3 mm29 parts4LNo license2RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1STM32
Kedtracker
kedder
82.7 × 56.6 mm78 parts2LNo license1RP2040/RP2350
Mechanics
cclienti
110 × 75 mm81 parts2LGPL-3.00ESP32
Drill
BrnoMarsRover
105 × 103 mm44 parts2LNo license0- schematic only · 98 partsSTM32
Shu poyo
shu-13
98 partsMIT0 ISA FPGA CPU
robfinch
263.9 × 114.8 mm98 parts2LNo license78Rfm adapter pi
fixxl
65 × 56.1 mm25 partsNo license10
How designs wire the LM3940
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LM3940 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 33 µF).
- The VI pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VOpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ISA FPGA CPU by robfinch, Rfm adapter pi by fixxl, AT65C02 Hobby Computer by Kayto and NEOM 0 by wal99d.
The LM3940 in open source designs
The gallery holds 10 open source boards using the LM3940 from 9 GitHub repositories; a typical one measures about 110 × 103 mm and carries around 90 components.
75% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is ISA FPGA v2 by robfinch.
Parts used alongside the LM3940
Microcontrollers on boards using the LM3940
What boards using the LM3940 are built for
LM3940: common questions
Where can I find a LM3940 reference design?
Each of the 10 boards on this page is a real design using the LM3940. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM3940 VO pin?
The VO pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 33 µF). Counted from the KiCad layouts of 8 open source designs using the LM3940.
What decoupling capacitors do designs use on the LM3940 VI pin?
The VI pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the LM3940.
Which microcontrollers do boards using the LM3940 use?
Most are built on STM32 (3), RP2040/RP2350 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the LM3940?
The median is 110 × 103 mm, and 75% are two-layer designs.
What is the most popular open source board using the LM3940?
By GitHub stars, ISA FPGA v2 by robfinch, with 78 stars.
Can I simulate one of these boards using the LM3940 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.