6 open source boards using the LM7812CT
Real designs built with the LM7812CT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PowerSupply PCB backup
acalinp
87 × 83.2 mm51 parts2LMIT212V 6V3 Delay
FordPrfkt
160 × 100 mm111 parts2LNo license1Twilight switch
joseguerra3000
73 × 35.6 mm21 parts2LNo license1Turtable control board hbridge
trublion
89.4 × 50 mm106 parts2LMIT0Alimentatore
CarloMara
117.6 × 97.8 mm83 parts2LNo license0PowerSupply
acalinp
87 × 83.2 mm50 parts2LMIT2
How designs wire the LM7812CT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM7812CT connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 12V on 5 of 5 designs.
- The IN pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 470 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 60% · 16V 40% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| OUTpin 3 | Connected to: 12V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PowerSupply PCB by acalinp, 12V 6V3 Delay by FordPrfkt, Twilight switch by joseguerra3000 and Alimentatore by CarloMara.
The LM7812CT in open source designs
The gallery holds 6 open source boards using the LM7812CT from 5 GitHub repositories; a typical one measures about 88.2 × 83.2 mm and carries around 67 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is PowerSupply PCB backup by acalinp.
Parts used alongside the LM7812CT
What boards using the LM7812CT are built for
LM7812CT: common questions
Where can I find a LM7812CT reference design?
Each of the 6 boards on this page is a real design using the LM7812CT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM7812CT OUT pin connected?
The OUT pin is tied to 12V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM7812CT.
How is the LM7812CT IN pin connected?
The IN pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 470 µF). Counted from the KiCad layouts of 5 open source designs using the LM7812CT.
What parts are used alongside the LM7812CT?
The LM393, LM555N and LM7805CT appear in the most repositories here.
How big is a typical board using the LM7812CT?
The median is 88.2 × 83.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM7812CT?
By GitHub stars, PowerSupply PCB backup by acalinp, with 2 stars.
Can I simulate one of these boards using the LM7812CT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.